How to turn up trousers

Are your trousers a little too long? Do you want to give them a fresh and tailored look? Turning up your trousers is a simple and effective solution to achieve that perfect fit. Whether you want to make a fashion statement or simply adjust the length, this article will guide you through the step-by-step process of turning up your trousers.

The first step is to gather the necessary tools: a ruler or measuring tape, a pair of sharp fabric scissors, matching thread, pins, and an iron. It’s important to have these items handy before you begin the process.

Next, measure the desired length of your trousers. Decide how much you want to shorten them and mark the measurement with pins. Remember to consider factors like footwear and personal style preference when determining the ideal length. If you are unsure, it’s always better to mark a longer length and make further adjustments later.

Once you have measured and marked the length, it’s time to start the actual turning up process. Use your ruler or measuring tape to ensure an even and symmetrical fold. Fold the fabric to the inside, up to the desired length, and press it firmly with the iron to create a crisp fold. Pin the fold in place to prevent any shifting or movement while sewing.

Methods for Turning Up Trousers

When it comes to turning up trousers, there are several methods you can try depending on the type of trousers and your desired look. Here are some effective and popular methods:

NHBETYS 4 rolls Hemming Tape for Trousers, Hem Tape Iron on for Trousers/Pants/Skirts/Clothes/Curtains/Fabrics, Length 200 cm Width 2.4 cm, No Sewing Required
NHBETYS 4 rolls Hemming Tape for Trousers, Hem Tape Iron on for Trousers/Pants/Skirts/Clothes/Curtains/Fabrics, Length 200 cm Width 2.4 cm, No Sewing Required
£7.99
Amazon.co.uk
Amazon price updated: October 16, 2024 3:44 pm
  1. Simple Cuff: This is the most common method and works well for trousers that have a straight or slightly tapered leg. To create a simple cuff, fold up the bottom of the trousers to the desired length, typically around 1-2 inches, and press down to create a crease. Then, fold up again to meet the crease and press again. Finally, use a needle and thread or a sewing machine to secure the cuff in place.
  2. Blind Hemming: This method is great for trousers with a wide leg or for a more tailored look. To create a blind hem, measure the desired length and cut off any excess fabric. Then, fold up the bottom of the trousers slightly, about half an inch, and press down. Next, fold up again to hide the raw edge and press again. Finally, use a blind hem stitch on a sewing machine or hand stitch the hem in place.
  3. Rolling Up: This method is perfect for casual and relaxed looks. Simply roll up the bottom of the trousers to the desired length, usually around 1-2 inches, and adjust until you achieve the desired cuff width. This method works well for trousers made from lightweight fabrics and creates a laid-back, effortless vibe.
  4. Stitching: If you want a more permanent cuff, you can use a needle and thread or a sewing machine to create a stitched cuff. After folding up the bottom of the trousers to the desired length, stitch around the cuff to secure it in place. This method works best for heavy-duty fabrics like denim and adds extra durability to your trousers.
  5. Tailor’s Help: When in doubt, taking your trousers to a professional tailor can ensure a perfect, customized fit. A tailor can measure and adjust the length of your trousers, as well as provide suggestions for the best cuffing method based on your specific needs and preferences.
See also  How to use toolstation radiator valve change kit

Remember to consider the fabric, style, and intended look of your trousers when choosing a cuffing method. With these helpful methods, you can easily turn up your trousers and achieve a stylish and polished look for any occasion.

Folding and Hand Stitching Technique

When it comes to turning up trousers, the folding and hand stitching technique is a popular and effective method. This technique allows you to create a hem that is durable and difficult to detect.

Before you begin, make sure you have the necessary tools, including a needle, thread, and pins. You may also find it helpful to have an iron and ironing board on hand to press the fabric as needed.

Step 1: Measuring and Pinning

Start by measuring the desired length of the trousers and add an additional inch for the hem. Mark this measurement with pins around the bottom of the leg to ensure an even fold.

Next, fold the fabric up to the level of the pins, taking care to maintain a straight line. Use the iron to press the fold in place, creating a crisp edge.

NHBETYS 5 rolls Iron-On Hemming Tape For Trousers, Pants Edge Shorten Hem Tape for Jeans/Skirts/Clothes/Curtains/Fabrics, Length 200cm Width 2.5cm, No Sewing Needed(multicolor)
NHBETYS 5 rolls Iron-On Hemming Tape For Trousers, Pants Edge Shorten Hem Tape for Jeans/Skirts/Clothes/Curtains/Fabrics, Length 200cm Width 2.5cm, No Sewing...
£8.89
Amazon.co.uk
Amazon price updated: October 16, 2024 3:44 pm

Step 2: Securing with Thread

Once the fabric is correctly folded, thread the needle and secure it with a knot at the end. Starting on the inside of the leg, insert the needle through the folded fabric and bring it out the other side. Repeat this process every few millimeters, creating small, even stitches along the hem.

Make sure to pull the thread snugly with each stitch, but not so tight that it puckers the fabric. Continue stitching along the hem until you reach the starting point.

To finish, tie a knot at the end of the thread and conceal it within the layers of fabric. Trim any excess thread for a clean and polished finish.

By using the folding and hand stitching technique, you can effectively turn up trousers to your desired length with a professional and durable result. With a little patience and practice, you’ll be able to achieve a hem that looks seamless and polished.

Using Iron-on Hemming Tape

If you don’t have sewing skills or don’t have the time to sew, iron-on hemming tape can be a quick and easy solution for turning up trousers. Here’s how to use it:

Womens Black Trousers Walking Trousers Flared Trousers Ladies Lounge Pants Fashion Sexy Plain Velvet Fabric Zip Wrinkle Pants 2 Piece Set Full Length Pants Fabric Zip
Womens Black Trousers Walking Trousers Flared Trousers Ladies Lounge Pants Fashion Sexy Plain Velvet Fabric Zip Wrinkle Pants 2 Piece Set Full Length Pants...
£19.87
Amazon.co.uk
Amazon price updated: October 16, 2024 3:44 pm
  1. Start by measuring how much you want to turn up the trousers. If you’re not sure, it’s always better to leave a little extra fabric, as you can always trim off the excess later.
  2. Once you have your measurement, lay the trousers flat on an ironing board or any flat surface.
  3. Cut a piece of iron-on hemming tape to fit the length of the trousers.
  4. Place the iron-on hemming tape on the fabric, aligning it with the edge of the trousers.
  5. Using a hot iron, press down firmly on the iron-on hemming tape for a few seconds. Repeat this process along the entire length of the piece.
  6. Allow the fabric to cool completely.
  7. Once cooled, try on the trousers to ensure they fall at the desired length. If you’re happy with the results, trim off any excess fabric.
  8. Your trousers are now ready to wear with the perfect turn-up!
See also  How to get cscs logo on npors card

Note: Always follow the instructions on the packaging of the iron-on hemming tape for best results.

Sewing with a Sewing Machine

When it comes to turning up trousers, using a sewing machine can make the process faster and more efficient. Here are a few tips for sewing your trousers using a sewing machine:

Prepare your sewing machine

Before you begin sewing, make sure your sewing machine is set up properly. Thread the machine and insert a new needle appropriate for the fabric you will be working with. Adjust the stitch length and presser foot pressure according to your preference and the thickness of the fabric.

Pin the hem

Start by turning the trousers inside out. Use pins to mark the desired length of the hem. Measure and mark this length evenly around the trouser legs. Once you are satisfied with the placement, remove the pins one by one and carefully fold the fabric up to meet the marked line. Pin the fabric in place, ensuring it remains flat and even.

(continued…)

Ironing trouser hem shortening, self-adhesive trouser cuff, hem fabric tape, suitable for suit pants, jeans, trousers, curtains, dresses, DIY sewing accessories (2 pieces*5M length) (Color : Black,
Ironing trouser hem shortening, self-adhesive trouser cuff, hem fabric tape, suitable for suit pants, jeans, trousers, curtains, dresses, DIY sewing...
£10.38
Amazon.co.uk
Amazon price updated: October 16, 2024 3:44 pm

…From here, you can choose to hand sew the hem using a slip or whip stitch, or you can use a sewing machine to create a clean and secure stitch. Adjust the machine settings for a basic straight stitch, align the folded fabric under the presser foot, and slowly sew along the width of the hem.

A sewing machine can save you time and effort, but remember to practice on a scrap fabric before sewing the actual trousers to ensure the machine settings and stitching look the way you want. Once you are done, turn the trousers right side out and give them a good press with an iron to set the new hem in place.

Cuffing and Pressing with an Iron

When turn up trousers, cuffing them can give a polished and stylish look. Proper pressing is important to ensure your cuff stays in place and looks neat. Follow these steps to cuff and press your trousers using an iron:

Step 1: Start by folding the bottom of your trouser leg upward, creating a cuff of the desired width. Make sure both sides are even and match in length.

Step 2: Use pins or clips to hold the cuff in place. This will prevent it from shifting as you press it.

AONAT Wonder Web 70 Yards Length Iron on Hemming Tapes,4cm Wide Adhesive Fabric No Sewing Hem Tape,for Splicing Fabrics Clothes Curtains Jeans Trousers Garment Clothes,Reduced Fabric Damage
AONAT Wonder Web 70 Yards Length Iron on Hemming Tapes,4cm Wide Adhesive Fabric No Sewing Hem Tape,for Splicing Fabrics Clothes Curtains Jeans Trousers...
Amazon.co.uk
See also  How to take out tea stains from clothes

Step 3: Set your iron to the appropriate temperature for the fabric of your trousers. Refer to the garment care label for guidance.

Fabric Type Iron Temperature
Natural Fibres (Cotton, Linen) Medium to High Heat
Synthetic Fibres (Polyester, Nylon) Low Heat
Blended Fabrics Medium Heat

Step 4: Place a damp cloth or press cloth over the cuff. This will protect the fabric from direct heat and prevent unwanted shine or damage.

Step 5: Press the iron down onto the cuff, applying even pressure. Move the iron back and forth, ironing the cuff for about 10-15 seconds on each spot.

Step 6: Remove the iron and allow the cuff to cool before unfolding it. This will help set the crease and prevent it from unraveling.

Step 7: Once the cuff is cool, remove any pins or clips. Gently unfold the cuff and check for any wrinkles or creases. If necessary, use the iron to lightly press out any imperfections.

ZZJCY Iron-On Hem Tape Adhesive Hemming Tape for Pants, No Sew Fabric Tape for Sewing Jeans Trousers Clothes Curtains, 5 Colors To Choose, 24 Mm Width, 3M Length,Brown
ZZJCY Iron-On Hem Tape Adhesive Hemming Tape for Pants, No Sew Fabric Tape for Sewing Jeans Trousers Clothes Curtains, 5 Colors To Choose, 24 Mm Width, 3M...
Amazon.co.uk

By cuffing and pressing your trousers with an iron, you can achieve a crisp and professional look. Remember to always follow the care instructions for your specific fabric, as different materials require different heat settings. Enjoy your newly turned up trousers!

Using Fabric Glue or Adhesive Tape

If you don’t have access to a sewing kit or don’t know how to sew, you can still turn up trousers using fabric glue or adhesive tape. While this method may not be as durable as sewing, it can be a quick and temporary solution.

Fabric Glue

Fabric glue is a great alternative to sewing if you want a no-sew option for turning up your trousers. Here’s how you can use fabric glue:

  1. Start by measuring the desired length you want to turn up on your trousers.
  2. Fold the excess fabric inside the trouser leg up to the measured length.
  3. Apply fabric glue along the folded edge to secure the fold.
  4. Press the glued edge firmly to ensure a strong bond.
  5. Hold the folded part in place for a few minutes until the glue dries and sets.
  6. Repeat the process for the other trouser leg.

Adhesive Tape

Adhesive tape is another quick fix option for turning up trousers without sewing. Follow these steps to use adhesive tape:

Mountain Warehouse Forest Mens Trekking Convertible Trousers - Regular Length Hiking Pants, Water Resistant, Reinforced Fabric, Zip Off - Best for Walking, Outdoors Navy 36W
Mountain Warehouse Forest Mens Trekking Convertible Trousers - Regular Length Hiking Pants, Water Resistant, Reinforced Fabric, Zip Off - Best for Walking,...
Amazon.co.uk
  1. Measure and fold up the excess fabric to the desired length.
  2. Secure the fold by placing adhesive tape on the inside of the trouser leg.
  3. Press the tape firmly to ensure it adheres well.
  4. Smooth out any wrinkles or creases in the fabric.
  5. Repeat the process for the other leg.

Keep in mind that using fabric glue or adhesive tape may not be as durable as sewing, especially for frequent wear and washing. It is recommended to sew the trousers properly when you have the resources and time.

Harrison Clayton
Harrison Clayton

Meet Harrison Clayton, a distinguished author and home remodeling enthusiast whose expertise in the realm of renovation is second to none. With a passion for transforming houses into inviting homes, Harrison's writing at https://thehuts-eastbourne.co.uk/ brings a breath of fresh inspiration to the world of home improvement. Whether you're looking to revamp a small corner of your abode or embark on a complete home transformation, Harrison's articles provide the essential expertise and creative flair to turn your visions into reality. So, dive into the captivating world of home remodeling with Harrison Clayton and unlock the full potential of your living space with every word he writes.

The Huts Eastbourne
Logo