How to remove cistern lid with double push button
Removing the cistern lid with a double push button may seem like a daunting task, but it is actually quite simple once you know how. The cistern lid covers the flushing mechanism of your toilet, and occasionally it may need to be removed for maintenance or cleaning purposes. Whether you are a homeowner or a professional plumber, this guide will walk you through the steps of safely and easily removing the cistern lid with a double push button.
Before you begin, it is important to note that not all cistern lids are the same, so the method described here may not apply to every type of double push button cistern. Make sure to consult the manufacturer’s instructions or seek professional advice if you are unsure about the specific model of your cistern lid.
Step 1: Turn off the water supply before attempting to remove the cistern lid. To do this, locate the shut-off valve, usually located near the bottom of the toilet bowl or on the wall behind the toilet. Turn the valve clockwise to shut off the water supply.
Step 2: Once the water supply is turned off, you can begin to remove the cistern lid. Position yourself in front of the toilet, facing the cistern, and locate the dual push buttons. These buttons are usually located on the top of the lid and are used for flushing purposes.
Step 3: Grip the cistern lid firmly with both hands and apply gentle pressure. Some cistern lids have latch mechanisms that need to be released before the lid can be removed. If this is the case, look for any visible latches or clips and release them accordingly.
Step 4: With the lid securely gripped, carefully lift it straight up. Be cautious not to apply too much force or tilt the lid, as this may cause damage or make it difficult to remove. If the cistern lid does not come off easily, double-check for any missed latch mechanisms and release them if necessary.
Step 5: Once the cistern lid is removed, you will have access to the flushing mechanism. Take this opportunity to clean or perform any necessary maintenance. To close the cistern, simply align the lid with the cistern and carefully lower it back into place. Make sure it is sitting securely before turning the water supply back on.
By following these steps, you can safely and easily remove the cistern lid with a double push button and perform any needed maintenance or cleaning. Remember to always consult the manufacturer’s instructions or seek professional advice if you are unsure about any aspects of the process. Now you can confidently tackle this task and keep your toilet in optimal working condition!
Tips for Removing Cistern Lid with Double Push Button
Removing the cistern lid with a double push button can sometimes be a bit tricky, but with the right approach, it can be done easily and safely. Follow these tips to remove the cistern lid without any hassle.
| Tip | Description |
| 1 | Gently lift the outer frame of the push button assembly. The outer frame is usually held in place by small clips or hooks. Use your fingers or a flat-edged tool to carefully pry the frame upwards until it loosens. |
| 2 | Next, locate the screws that secure the double push buttons. These screws are typically located under the outer frame or on the sides of the buttons. Unscrew these screws using a screwdriver or a suitable tool. |
| 3 | Once the screws are removed, gently lift the push buttons and set them aside. Be careful not to tug or pull too hard as this can damage the buttons or the surrounding mechanism. |
| 4 | You should now be able to see the cistern lid clips or hooks that secure the lid in place. These clips may differ from model to model but generally require downward pressure or sliding motion to release them. Make sure to study your particular cistern lid design to understand how the clips operate. |
| 5 | Apply gentle downward pressure on the clips or release them according to the specific instructions for your cistern lid. Once the clips are released, lift the lid carefully and set it aside. |
Remember to handle the cistern lid and its components with care to avoid any accidental damage. Furthermore, consult the manufacturer’s instructions whenever available as they may provide model-specific steps for removing the cistern lid with a double push button.
Prepare for the Process
Before attempting to remove the cistern lid, there are a few steps you should take to ensure a smooth and safe process:
1. Familiarize yourself: Take a moment to familiarize yourself with the cistern lid and its components. Double push buttons are typically located on the top of the lid and control the flushing mechanism of the toilet.
2. Gather necessary tools: You may need a few tools to safely remove the cistern lid. Common tools include a screwdriver or Allen wrench, depending on the type of fasteners used to secure the lid.
3. Turn off water supply: Before starting the removal process, it’s important to turn off the water supply to the toilet. You can typically find the shut-off valve located near the base of the toilet or on the wall behind it.
4. Protect the area: Place a towel or old cloth on the floor around the toilet to catch any water that may spill or dripped during the removal process.
5. Take safety precautions: Since you’ll be working near water and potentially dealing with small parts, it’s important to practice safety. Wear protective gloves and be cautious throughout the process to avoid accidents.
6. Follow manufacturer’s instructions: Every brand and model of toilet can be slightly different, so it’s a good idea to consult the instruction manual or manufacturer’s website for specific guidance on removing the cistern lid.
7. Take your time: Removing the cistern lid can be a delicate process. Take your time and work carefully to avoid damaging any parts or causing any unnecessary leaks.
Once you’ve completed these steps, you’ll be ready to proceed with removing the cistern lid and accessing the double push buttons.
Remove the Cistern Lid
When it comes to removing the cistern lid with a double push button, there are a few simple steps to follow. Here’s how you can do it:
- Start by locating the double push button on the cistern lid. This is usually located at the top center of the lid.
- Gently press down on the button covers to unclip them from the lid. You may need to use slight force, but be careful not to apply too much pressure to avoid damaging the lid.
- Once the button covers are released, you will be able to see the screws that secure the lid in place. Using a screwdriver, carefully loosen and remove these screws.
- With the screws removed, you can now lift the cistern lid off the tank. It’s important to do this slowly and evenly, as the lid may be heavy and you don’t want to drop it.
- Once the lid is removed, you can access the inside of the cistern for cleaning or maintenance purposes.
- To put the lid back on, simply reverse the steps above. Carefully place the lid back on the tank, ensuring that it aligns properly. Secure the screws back in place and snap the button covers back onto the double push button.
By following these steps, you can easily remove and replace the cistern lid with a double push button. Remember to handle the lid with care to avoid any damage or accidents.
Replace the Cistern Lid
Once you have successfully removed the cistern lid, you may need to replace it for a variety of reasons. Whether it is damaged, worn out, or simply needs a fresh look, replacing the cistern lid is a relatively simple task. Follow the steps below to properly replace the cistern lid with a double push button.
What You Will Need:
- New cistern lid with a double push button
- Flathead screwdriver (if necessary)
Steps to Replace the Cistern Lid:
- Start by carefully removing the old cistern lid if it is still in place.
- If the old cistern lid is stuck or difficult to remove, use a flathead screwdriver to gently pry it off.
- Once the old cistern lid is removed, take the new cistern lid with a double push button.
- Align the double push button with the holes on the cistern and gently press it into place.
- Make sure the double push button is secured tightly and sits flush with the surface of the cistern.
- If necessary, adjust the position of the double push button until it is perfectly centered and aligned.
- Once the double push button is securely in place, check if it functions properly by pressing it to flush the toilet.
- If everything is working as expected, your new cistern lid with a double push button is successfully replaced!
Remember to dispose of the old cistern lid properly. If it is still in good condition, consider donating it or recycling it instead of throwing it away.
Harrison Clayton
Meet Harrison Clayton, a distinguished author and home remodeling enthusiast whose expertise in the realm of renovation is second to none. With a passion for transforming houses into inviting homes, Harrison's writing at https://thehuts-eastbourne.co.uk/ brings a breath of fresh inspiration to the world of home improvement. Whether you're looking to revamp a small corner of your abode or embark on a complete home transformation, Harrison's articles provide the essential expertise and creative flair to turn your visions into reality. So, dive into the captivating world of home remodeling with Harrison Clayton and unlock the full potential of your living space with every word he writes.
