How to remove a shower tray

Removing a shower tray is a task that may seem daunting at first, but with the right tools and knowledge, you can do it yourself. Whether you need to replace a damaged or outdated shower tray, or simply want to create a new look for your bathroom, this step-by-step guide will help you through the process.

Before you begin, it’s important to note that removing a shower tray can be a time-consuming and physically demanding task. It’s important to have the necessary tools and materials on hand, and to allot enough time to complete the job properly. Additionally, if you’re not comfortable working with plumbing and have any concerns about damaging pipes or other fixtures, it may be best to consult a professional.

To start, gather the tools and materials you’ll need. This may include a crowbar or pry bar, a hammer, a utility knife, a screwdriver, a shovel, and gloves. It’s also important to ensure you have appropriate protection for yourself and your surroundings, such as safety goggles and dust sheets.

Removing a shower tray: Step-by-step guide

Removing a shower tray can be a DIY project that you can easily accomplish with some basic tools. Follow this step-by-step guide to help you successfully remove your shower tray:

Step 1: Turn off the water supply

Non-Slip Bath Stickers, 18 Pieces, Shower Strips, Bathtub, Non-Slip Stickers, Adhesive Tape for Shower Tray Steps LsJ207 (Clear, One Size)
Non-Slip Bath Stickers, 18 Pieces, Shower Strips, Bathtub, Non-Slip Stickers, Adhesive Tape for Shower Tray Steps LsJ207 (Clear, One Size)
£6.66
Amazon.co.uk
Amazon price updated: October 6, 2024 1:02 pm

Before you start removing the shower tray, locate and turn off the water supply to prevent any leaks or flooding. It is important to ensure that there is no water running in the shower before you proceed.

Step 2: Remove the drain cover

Use a screwdriver to carefully remove the drain cover by unscrewing the screws holding it in place. Keep the screws in a safe place so that you can reattach the drain cover later on.

Step 3: Disconnect the drain pipe

Loosen the nuts connecting the drain pipe to the trap using a wrench or pliers. Once the nuts are loose, carefully disconnect the drain pipe from the trap. Be gentle to avoid any damage to the pipes.

mySPOTTI Step On - Self-Adhesive Non-Slip Sticker for Bath & Shower Trays (30 x 50 cm, Happy Pineapple)
mySPOTTI Step On - Self-Adhesive Non-Slip Sticker for Bath & Shower Trays (30 x 50 cm, Happy Pineapple)
£33.31
Amazon.co.uk
Amazon price updated: October 6, 2024 1:02 pm
See also  How to hide hair breakage on top of head

Step 4: Disconnect the shower enclosure

If your shower tray is connected to a shower enclosure, use a screwdriver or a drill to unscrew the screws holding the enclosure in place. Start from the inside and work your way outwards, ensuring that all screws are removed. Once the screws are removed, gently lift and separate the enclosure from the shower tray.

Step 5: Loosen the fixing screws

Look for the fixing screws located around the edges of the shower tray. Use a screwdriver or an Allen key to unscrew these fixing screws. Make sure to keep the screws in a safe place as you will need them for your new shower tray installation.

Step 6: Disconnect the waste trap

Just Trays FIX NA Flow Flexible Hose Adhesive Step for Upstand, Shower
Just Trays FIX NA Flow Flexible Hose Adhesive Step for Upstand, Shower
£284.54
Amazon.co.uk
Amazon price updated: October 6, 2024 1:02 pm

Use a wrench or pliers to loosen the nuts connecting the waste trap to the plumbing system. Once the nuts are loose, carefully remove the waste trap from the drainpipe.

Step 7: Remove the shower tray

With the fixing screws and waste trap disconnected, gently lift and remove the shower tray from its position. Make sure to lift slowly and carefully to avoid any damage to the tray or the surrounding area.

By following these steps, you should be able to successfully remove your shower tray. Remember to take safety precautions and be mindful of any electrical connections in the area. Once the shower tray is removed, you can proceed with installing a new tray or making any necessary repairs.

Prepare the necessary tools and materials

Before you begin removing the shower tray, make sure you have all the necessary tools and materials at hand. Here’s a list of what you’ll need:

SY-Home Shower foot tray suction cup, bathroom shower pedal leg shaving bracket step support leg shower shaving foot trapping (quantity * 2)
SY-Home Shower foot tray suction cup, bathroom shower pedal leg shaving bracket step support leg shower shaving foot trapping (quantity * 2)
Amazon.co.uk
  • Protective gloves
  • Safety goggles
  • Dust mask
  • Adjustable wrench
  • Screwdriver
  • Utility knife
  • Putty knife
  • Plastic sheets or drop cloths
  • Empty buckets or containers
  • Plumber’s caulking
  • Waterproof tape
  • Crowbar (if needed)
  • Old towels or rags
  • Rubber mallet

Having all the necessary tools and materials ready can help streamline the process and ensure that you have everything you need to successfully remove the shower tray.

See also  How to fix broken moon lantern bg3

Turn off the water supply and disconnect the plumbing

Before starting the process of removing the shower tray, the first step is to turn off the water supply. Locate the water shut-off valve, usually located near the shower or in the bathroom. Rotate the valve clockwise until it is tightly closed to completely shut off the water.

Once the water supply is turned off, it is necessary to disconnect the plumbing connected to the shower tray. This usually involves turning off the taps and loosening the connectors with a wrench or pliers. It is important to place a bucket or towel beneath the plumbing to catch any water that may still be present in the pipes.

Take your time and carefully disconnect the pipes and faucets from the shower tray. If you encounter any stubborn or corroded parts, using a lubricant may help make the process easier. Keep in mind that it is important to remember how the pipes were connected for reassembly later.

Note: If you are unsure about how to disconnect the plumbing or are having difficulty, it is recommended to consult a professional plumber to avoid any damage or further issues.

Dismantling the old shower tray

Before you begin the process of removing the old shower tray, it’s important to make sure the water supply and electricity to the shower are turned off. This will prevent any accidents or damage from occurring.

Here is a step-by-step guide on how to dismantle the old shower tray:

    Step 1: Remove the shower door or curtain

    If your shower has a door or curtain, remove it by unclipping or unscrewing it from the shower walls.

    Step 2: Disconnect the waste outlet

    Locate the waste outlet, which is usually located in the center or bottom of the shower tray. Unscrew or unclamp the waste pipe to disconnect it from the tray.

    Step 3: Disconnect the shower fittings

    Using a wrench or screwdriver, disconnect any fittings or screws attaching the shower tray to the walls or floor. Carefully remove them, making sure not to damage the surrounding tiles or walls.

    Step 4: Lift and remove the shower tray

    With the fittings removed, carefully lift the shower tray from its place. You may need an extra pair of hands to help with this step, as shower trays can be heavy and awkward to lift.

    Step 5: Clean the area

    Once the old shower tray is removed, clean the area thoroughly to ensure there is no remaining debris or water. This will help prepare the space for the installation of the new shower tray.

See also  How to become a football commentator

Remove the shower screen or doors

If your shower tray has a shower screen or doors attached, you’ll need to remove them before proceeding with the removal of the tray itself. Here’s how you can safely remove the shower screen or doors:

  1. Start by opening the shower doors or moving the shower screen to its fully open position. Take note of any screws or brackets securing the screen or doors to the walls or frame.
  2. Using a screwdriver or an appropriate tool, remove any screws or brackets that are holding the shower screen or doors in place.
  3. Carefully lift the screen or doors off the frame or hinges. It may be helpful to have someone assist you with this step to avoid dropping or damaging the screen or doors.
  4. Set the screen or doors aside in a safe location, away from the working area, to prevent any accidents or damage.

After removing the shower screen or doors, you can proceed with the next steps of removing the shower tray. Be sure to refer to the manufacturer’s instructions and exercise caution while working to prevent any injuries or damage to your bathroom fixtures.

Harrison Clayton
Harrison Clayton

Meet Harrison Clayton, a distinguished author and home remodeling enthusiast whose expertise in the realm of renovation is second to none. With a passion for transforming houses into inviting homes, Harrison's writing at https://thehuts-eastbourne.co.uk/ brings a breath of fresh inspiration to the world of home improvement. Whether you're looking to revamp a small corner of your abode or embark on a complete home transformation, Harrison's articles provide the essential expertise and creative flair to turn your visions into reality. So, dive into the captivating world of home remodeling with Harrison Clayton and unlock the full potential of your living space with every word he writes.

The Huts Eastbourne
Logo