How to put sony wh-1000xm4 in pairing mode

Harrison Clayton March 30, 2023 7

If you own a pair of Sony wh-1000XM4 wireless headphones, you know how important it is to keep them connected to your devices for an unmatched audio experience. Whether you want to connect to your smartphone, tablet, or computer, putting your headphones in pairing mode is the first step to establishing a successful connection.

To put the Sony wh-1000XM4 in pairing mode, follow these simple steps:

Step 1: Turn on your headphones by pressing the “Power” button located on the left earcup.

Step 2: Once the headphones are on, locate the “Custom” button on the right earcup. It is labeled with an icon that looks like a small gear or settings wheel.

Step 3: Press and hold the “Custom” button until you hear a voice prompt saying, “Bluetooth pairing.”

JISER Wireless Bluetooth Headphones 5.0 Binaural Noise Reduction CVC 6.0 Automatic Pairing, Sport...

£35.16

as of June 27, 2024 7:25 am

Check Price

Amazon.co.uk

Step 4: Your Sony wh-1000XM4 headphones are now in pairing mode and ready to connect to your desired device.

Note: Make sure Bluetooth is enabled on the device you want to pair with your headphones. Refer to the user manual of your specific device for instructions on how to enable Bluetooth if needed.

That’s it! You’re now ready to enjoy the exceptional sound quality and advanced features of your Sony wh-1000XM4 headphones by connecting them to your preferred device.

The Complete Guide: How to Put Sony WH-1000XM4 in Pairing Mode

If you have recently purchased the Sony WH-1000XM4 headphones or if you’re having trouble connecting them to your device, you may need to put them in pairing mode. Pairing mode allows the headphones to search and connect with your Bluetooth-enabled devices. In this guide, we will explain how to put the Sony WH-1000XM4 in pairing mode quickly and effortlessly.

Step 1: Preparation

Before you begin, ensure that your Sony WH-1000XM4 headphones have sufficient battery level to activate pairing mode. If the battery is low, charge the headphones using the provided USB-C cable.

Step 2: Power On the Headphones

To start the pairing process, press and hold the power button on the Sony WH-1000XM4 headphones until you hear the power-on sound. The power button is usually located at the bottom of the right earcup.

Step 3: Enable Bluetooth on Your Device

On your Bluetooth-enabled device, locate the Bluetooth settings and enable Bluetooth. This process may differ slightly depending on the device you are using, but most devices have a Bluetooth toggle in the settings menu.

Step 4: Put Sony WH-1000XM4 in Pairing Mode

On the Sony WH-1000XM4 headphones, press and hold the power button again for about 7 seconds, until you hear the “Bluetooth pairing” prompt. At this point, the headphones are in pairing mode and ready to be connected to your device.

Step 5: Connect to Your Device

On your Bluetooth-enabled device, look for “Sony WH-1000XM4” or a similar name in the list of available devices. Select the headphones to establish the connection. Once connected, you will hear a confirmation sound or prompt, indicating a successful pairing.

Congratulations! You have successfully put the Sony WH-1000XM4 headphones in pairing mode and connected them to your device. Enjoy your wireless audio experience with the innovative features offered by these premium headphones.

Remember, if you ever need to pair your Sony WH-1000XM4 with another device in the future, simply repeat steps 2 to 5.

Step-by-Step Tutorial: Putting Sony WH-1000XM4 in Pairing Mode

To connect your Sony WH-1000XM4 headphones to a new device, you need to put the headphones into pairing mode. The following step-by-step instructions will guide you through the process:

Top 3 Methods for Putting Sony WH-1000XM4 in Pairing Mode

In order to connect your Sony WH-1000XM4 headphones to another device via Bluetooth, you will need to put them in pairing mode. Follow these steps to easily enter pairing mode on your WH-1000XM4:

Method 1: Using the Power Button

Make sure your headphones are turned off.
Locate the Power button on your headphones, usually located on the left earcup.
Press and hold the Power button for about 7 seconds until you enter pairing mode. You will hear a voice prompt confirming the headphones are in pairing mode.

Method 2: Using the Custom Button

Ensure your headphones are turned off.
Find the Custom button on your headphones, typically found on the right earcup.
Press and hold the Custom button for approximately 7 seconds until the headphones enter pairing mode. You will hear an audio confirmation indicating pairing mode.

Method 3: Using the Sony Headphones Connect App

Turn on your headphones.
Download and install the Sony Headphones Connect app on your smartphone or tablet.
Launch the app and follow the on-screen instructions to pair your headphones.

Note: Before starting the pairing process, ensure your headphones are fully charged and positioned within a reasonable range of the device you want to pair with.

By following these three simple methods, you should now be able to put your Sony WH-1000XM4 headphones in pairing mode and connect them to your desired device via Bluetooth.

Troubleshooting: How to Troubleshoot Pairing Mode Issues with Sony WH-1000XM4

If you are experiencing issues with your Sony WH-1000XM4 headphones not entering the pairing mode, this troubleshooting guide will help you identify and resolve the problem.

1. Check Headphone Battery Level

Ensure that your headphones have enough battery power to enter the pairing mode. Low battery levels can prevent the headphones from initiating this mode. Connect the headphones to a power source using the included USB cable and observe if the battery level increases.

2. Disconnect Previous Bluetooth Connections

Make sure that your headphones are not currently connected to another device via Bluetooth. If your headphones are connected to another device, disconnect the Bluetooth connection, and then try putting them in pairing mode again.

3. Reset Headphones

If the above steps didn’t work, try resetting your Sony WH-1000XM4 headphones. To reset the headphones, follow these steps:

Make sure that the headphones are powered on.
Press and hold the Power/Bluetooth button and the Custom button simultaneously for about seven seconds.
The Power/Bluetooth indicator light will start flashing white rapidly, indicating that the headphones have been reset.

4. Update Firmware Version

Outdated firmware can sometimes cause pairing mode issues. Ensure that your headphones are running the latest firmware version. Download and install the latest firmware updates from the Sony support website.

5. Contact Sony Support

If you have followed all the troubleshooting steps above and your Sony WH-1000XM4 headphones still won’t go into pairing mode, it is recommended that you contact Sony support for further assistance. They will be able to provide you with personalized troubleshooting steps or guide you through the repair or replacement process if necessary.

By following these troubleshooting steps, you should be able to resolve any pairing mode issues you are facing with your Sony WH-1000XM4 headphones. Enjoy your wireless audio experience!

Expert Tips: Best Practices for Putting Sony WH-1000XM4 in Pairing Mode

Putting your Sony WH-1000XM4 headphones in pairing mode is essential to connect them to a new device. Follow these expert tips for a smooth and successful pairing process:

Charge the headphones: Before initiating the pairing mode, ensure that your Sony WH-1000XM4 headphones have sufficient battery charge. Low battery levels may inhibit the pairing process.
Turn on the headphones: To put your headphones in pairing mode, press and hold the power button on the headphones for about 7 seconds until you hear the voice guidance say, “Bluetooth pairing.” The indicator light on the headphones will start flashing blue and white.
Clear previous pairings: If your headphones have been previously paired with another device, make sure to reset them. In pairing mode, press and hold both the power button and the custom button for about 7 seconds until the indicator flashes blue quickly. This action will erase all the saved connections and reset the headphones to factory settings.
Keep your headphones close to the device: When trying to pair your Sony WH-1000XM4 with a new device, ensure that the headphones are within close proximity to the device. This will ensure a more stable and quicker connection.
Activate Bluetooth on the device: Make sure the device you want to pair your headphones with has its Bluetooth functionality turned on. Refer to the device’s manual or settings to enable Bluetooth.
Select your headphones on the device: Once the Bluetooth is activated, go to the device’s Bluetooth settings and scan for available devices. Select the “Sony WH-1000XM4” from the list of available devices. If prompted, enter the passcode “0000” to complete the pairing process.
Confirm successful pairing: After selecting the headphones on the device, you will receive a notification confirming the successful pairing. The indicator light on the Sony WH-1000XM4 headphones will stop flashing and remain solid white or blue.

Frequently Asked Questions: Answering Common Queries on Putting Sony WH-1000XM4 in Pairing Mode

Pairing Bluetooth devices can sometimes be a confusing process, especially when you have a high-end wireless headset like the Sony WH-1000XM4. To help you put your Sony WH-1000XM4 headphones in pairing mode effortlessly, here are answers to some common questions:

1. How do I put my Sony WH-1000XM4 headphones in pairing mode?

To enable pairing mode on your Sony WH-1000XM4 headphones, follow these steps:

Ensure your headphones are turned off.
Press and hold the power button on the left earcup for about 7 seconds.
The Bluetooth indicator light will start flashing blue and red, indicating that the headphones are now in pairing mode.

2. How do I connect my Sony WH-1000XM4 to a new Bluetooth device?

If you want to connect your Sony WH-1000XM4 headphones to a new Bluetooth device, follow these steps:

Make sure your headphones are in pairing mode by following the steps mentioned in question 1.
On the device you want to pair, go to the Bluetooth settings.
Look for your Sony WH-1000XM4 in the list of available devices.
Select your headphones to complete the pairing process.

3. Why won’t my Sony WH-1000XM4 headphones enter pairing mode?

If you are having trouble putting your Sony WH-1000XM4 headphones in pairing mode, try the following troubleshooting steps:

Ensure that your headphones are turned off before attempting to enter pairing mode.
Make sure your headphones have sufficient battery life.
Reset your headphones by pressing and holding the power button for about 20 seconds, then repeat the pairing process.
Check if there are any nearby devices interfering with the Bluetooth signal. Move away from potential sources of interference and try putting the headphones in pairing mode again.

We hope these frequently asked questions have provided you with the necessary guidance to put your Sony WH-1000XM4 headphones in pairing mode. If you are still facing issues, refer to the user manual or contact Sony support for further assistance.

Harrison Clayton

Meet Harrison Clayton, a distinguished author and home remodeling enthusiast whose expertise in the realm of renovation is second to none. With a passion for transforming houses into inviting homes, Harrison's writing at https://thehuts-eastbourne.co.uk/ brings a breath of fresh inspiration to the world of home improvement. Whether you're looking to revamp a small corner of your abode or embark on a complete home transformation, Harrison's articles provide the essential expertise and creative flair to turn your visions into reality. So, dive into the captivating world of home remodeling with Harrison Clayton and unlock the full potential of your living space with every word he writes.