How to pair now tv remote
If you are a Now TV subscriber and find yourself in need of pairing your remote, don’t worry, we have got you covered! In this guide, we will walk you through the simple steps to pair your Now TV remote with your TV.
Step 1: Firstly, make sure that your Now TV box is powered on and your TV is turned on. This is essential for the pairing process to work.
Step 2: Once your Now TV box and TV are powered on, grab your remote and ensure that it has batteries inserted. Without a functional remote, the pairing process will not be successful.
Step 3: On the Now TV remote, press and hold the reset button. You can find the reset button located on the back of the remote. Keep holding it until you see the LED light on the front of the remote begin to flash and change colors.
Step 4: While the LED light is flashing, point the remote at your TV and press and hold the TV power button along with the Reset button simultaneously. Continue holding both buttons until you see the LED light on the front of the remote turn solid, indicating that the remote has been paired successfully.
Note: If the LED light does not stop flashing and turn solid after several attempts, make sure that the remote is within range of the Now TV box and keep trying until successful. It may take a few tries to get it right. Additionally, if your TV does not turn off after successful pairing, try pressing the TV power button one more time.
By following these simple steps, you can easily pair your Now TV remote with your TV and get back to enjoying your favorite shows and movies in no time. Happy streaming!
Step-by-Step Guide to Pair a Now TV Remote
Step 1: Ensure that your Now TV device is turned on and ready for pairing.
Step 2: On your Now TV remote, press and hold both the “Back” button and the “Home” button simultaneously for about 5 seconds.
Step 3: When the LED light on the front of the remote starts flashing, release both buttons.
Step 4: Now, on your Now TV device, look for the on-screen instructions to complete the pairing process.
Step 5: Follow the on-screen prompts and press the specified buttons on your Now TV remote to complete the pairing process.
Step 6: Once the pairing process is complete, a message will be shown on your TV screen confirming the successful pairing of the remote.
Step 7: Test your Now TV remote by using it to navigate through the menus and perform various functions on your Now TV device. Ensure that all the buttons are working properly.
Step 8: If the remote does not pair successfully, repeat the process starting from Step 2.
Note: If you’re having trouble with the pairing process, ensure that the Now TV remote has fresh batteries and that there are no obstacles blocking the signal between the remote and the Now TV device.
Check for Compatible Devices
Before pairing your NOW TV remote, it is important to ensure that you have a compatible device. The NOW TV remote is specifically designed to work with NOW TV Smart Boxes and NOW TV Smart Stick.
Here are the compatible devices:
NOW TV Smart Box
The NOW TV Smart Box is a digital media player that allows you to stream content from various providers, including NOW TV, BBC iPlayer, Netflix, and more. The remote is designed to work seamlessly with this device, providing an intuitive and easy-to-use experience.
NOW TV Smart Stick
The NOW TV Smart Stick is a pocket-sized streaming device that plugs into the HDMI port on your TV. It offers access to a wide range of streaming apps and services, including NOW TV, Netflix, Spotify, and more. The remote that comes with the Smart Stick is specifically designed to work with this device, allowing you to control your entertainment with ease.
If you have any of these compatible devices, you can proceed with the pairing process. If you don’t have a compatible device, you may need to consider getting one in order to use the NOW TV remote.
Insert Batteries
To pair your Now TV remote, you first need to insert batteries. Follow the steps below:
1. Turn the remote over to the backside, with the buttons facing down.
2. Locate the battery compartment and slide it open using the small tab.
3. Insert two AAA batteries into the compartment, making sure to match the positive (+) and negative (-) ends correctly.
4. Close the battery compartment by sliding it back into place until it clicks.
5. Make sure the remote is now turned face up with the buttons exposed and ready to use.
Your Now TV remote is now ready for the pairing process. Proceed to the instructions on how to pair your remote with your Now TV device.
Turn on Your TV or Streaming Device
Before pairing your NOW TV remote, make sure to turn on your TV or streaming device. By doing this, you will be able to access the necessary settings to pair your remote successfully.
Turning on Your TV
If you have a separate TV that needs to be turned on, locate the power button on the TV or the remote control that came with your TV. Press the power button to turn on the TV, and wait for it to fully boot up.
Turning on Your Streaming Device
If you have a separate streaming device, such as a Roku or Amazon Fire Stick, follow these steps to turn it on:
Streaming Device | Power On Instructions |
---|---|
Roku | Ensure the HDMI cable is connected to your TV and the Roku device. Press the power button on your Roku remote to turn on the streaming device. |
Amazon Fire Stick | Connect the Amazon Fire Stick to an available HDMI port on your TV. Then, plug the Fire Stick’s power adapter into a power outlet. Finally, switch your TV’s input to the correct HDMI channel. |
Once your TV or streaming device is powered on, you can proceed with pairing your NOW TV remote. Refer to the specific remote and device instructions to complete the pairing process effectively.
Pair the Remote
When setting up your Now TV remote, you may need to pair it with your Now TV device. Pairing the remote allows it to communicate with your device and function properly. Follow the instructions below to pair your Now TV remote:
Step 1: Prepare the Remote
First, ensure that your Now TV remote has batteries and is turned on. Check that the batteries are inserted correctly with the positive and negative ends aligning with the remote’s contacts.
Step 2: Put the Device in Pairing Mode
You will now need to put your Now TV device into pairing mode. To do this, locate the pairing button on the device. The location of the button may vary depending on the model. Press and hold the pairing button until the light on the device starts flashing.
Step 3: Pair the Remote
Once the device is in pairing mode, point the Now TV remote towards the device and press any button. The remote will now be paired with the Now TV device, and you can start using it to control your device.
If the pairing process fails, try repeating the steps above. Ensure that the remote and device have a clear line of sight and are within a reasonable distance. Also, make sure that there are no other infrared devices interfering with the pairing process.
Now TV Model | Pairing Button Location |
---|---|
Now TV Smart Stick | Side of the stick |
Now TV Box | Back of the box |
Now TV Smart Box | Back of the box |