How to install wall hung toilet
Installing a wall hung toilet not only adds aesthetic appeal to your bathroom, but it also provides additional floor space and easy cleaning. However, the installation process may seem daunting if you’ve never done it before. Fear not! With the right tools and a bit of patience, you can have your wall hung toilet securely in place and ready to use in no time.
Step 1: Prepare the Mounting Bracket
Before you can install the wall hung toilet, you’ll first need to prepare the mounting bracket. Carefully measure the distance from the finished wall to the center of the waste drain. This measurement will determine the ideal height at which the bracket should be installed. Mark this point on the wall, ensuring it is level.
Pro Tip: It is crucial to have proper blocking between the wall studs to support the weight of the toilet. If necessary, install blocking according to the manufacturer’s instructions.
Step 2: Attach the Mounting Bracket
Once you have determined the correct height and marked it on the wall, attach the mounting bracket using the appropriate screws and a drill. Make sure the bracket is securely fastened to the wall to ensure the toilet’s stability. Double-check that the bracket is level before proceeding to the next step.
Step 3: Connect the Plumbing
After securing the mounting bracket, it’s time to connect the plumbing. Starting with the waste drainage pipe, ensure it lines up with the opening in the bracket. Install the necessary fittings, such as a P-trap, to connect the toilet to the plumbing system. Don’t forget to check for any leakages and make adjustments as needed.
Pro Tip: It is always a good idea to consult a professional plumber or follow the manufacturer’s instructions when connecting the plumbing. This will help ensure a proper and leak-free installation.
Step 4: Hang the Toilet
Now that the plumbing is connected, it’s time to hang the toilet. Gently lift the wall hung toilet and align its holes with the studs on the mounting bracket. Carefully lower the toilet onto the bracket, making sure it is level and properly seated. Double-check all connections and screws for stability before using the toilet.
Pro Tip: It might be helpful to have an extra set of hands to assist in lifting and aligning the toilet with the mounting bracket.
Step 5: Test and Finish the Installation
With the toilet securely in place, it’s crucial to test its functionality before finishing the installation. Run water to flush the toilet and check for any leaks or issues with the plumbing. Once you are satisfied with its performance, complete the installation by attaching the toilet seat and cover according to the manufacturer’s instructions, and you’re done!
Following these steps and taking proper safety precautions will ensure a successful installation of your wall hung toilet. Now, sit back, relax, and enjoy the modern and space-saving convenience of your new bathroom fixture!
Preparing for Installation
Before you begin the installation process, it’s essential to gather all the necessary tools and materials. Here’s what you’ll need:
1. Wall hung toilet kit, including the toilet bowl and the in-wall tank system.
2. Measuring tape.
3. Level.
4. Pencil.
5. Stud finder.
6. Drill and appropriate drill bits.
7. Screwdriver.
8. Adjustable wrench.
After you have gathered all the necessary tools and materials, it’s time to prepare the wall for installation. Start by locating the toilet’s rough-in measurements on the wall. These measurements will determine the placement of the in-wall tank system.
Use the stud finder to locate the studs in the wall. It’s crucial to anchor the in-wall tank system securely to the studs for stability. Mark the location of the studs with a pencil.
Once you have found the appropriate location for the in-wall tank system, use the measuring tape and level to ensure it is perfectly aligned and level. Mark the outline of the tank on the wall using a pencil.
Next, drill pilot holes into the studs at the marked locations. These pilot holes will make it easier to insert screws later on.
Now that the wall is prepared, the next step is to install the in-wall tank system. Follow the manufacturer’s instructions carefully to ensure proper installation.
Check the Wall Structure
Before installing a wall hung toilet, it’s important to check the wall structure to ensure that it can support the weight of the toilet. Wall hung toilets are designed to be mounted on a reinforced wall, which is typically made of concrete or sturdy wood framing.
Here are some steps to check the wall structure:
|
1. Locate the wall studs: |
Use a stud finder or tap the wall lightly to find the vertical wooden studs behind the drywall. These studs provide the necessary support for the toilet. |
|
2. Measure the distance between the studs: |
Measure the distance between the studs to ensure that it matches the mounting holes of the toilet. Most wall hung toilets have a standard spacing of 9 inches or 12 inches between the mounting holes.  ZNDTD Wall Mounted Bathroom Mirror Wall Mounted Square Mirror 3 Colours Multiple Sizes Aluminium Alloy Frame Bathroom Toilet Vanity Makeup Mirror Easy...
Amazon.co.uk
|
|
3. Check the condition of the studs: |
Inspect the condition of the studs to ensure they are structurally sound and free from any damage, such as rotting or termite infestation. Replace any damaged studs before proceeding with the toilet installation. |
|
4. Reinforce the wall if necessary: |
If the wall studs are not strong enough to support the toilet, it may be necessary to reinforce the wall by adding additional supports, such as blocking or steel brackets, between the studs. Consult a professional if you are unsure about how to reinforce the wall properly. |
By checking the wall structure and ensuring it is capable of supporting the weight of the toilet, you can ensure a safe and secure installation of your wall hung toilet.
Gather the Necessary Tools
Before starting the installation process for a wall hung toilet, it is essential to gather all the necessary tools to ensure a smooth and successful installation. Below is a list of tools that should be gathered before beginning the installation:
- Tape measure
- Pencil or marker
- Screwdriver (both flathead and Phillips)
- Level
- Adjustable wrench
- Hammer
- Drill
- Masonry bit (if drilling into tile or concrete)
- Socket set
- Hacksaw or reciprocating saw (for cutting pipes if necessary)
- Plumber’s putty
- Plumber’s tape
- Bolts and nuts (typically included with the toilet)
Having all the required tools prepared and easily accessible will streamline the installation process and ensure that you can proceed smoothly without any interruptions. It is recommended to verify the list and make sure you have all the tools needed before beginning the installation.
Installing the Wall Frame
Installing the wall frame is an essential step in the installation process of a wall hung toilet. The wall frame acts as the support system for the toilet and ensures its stability and security.
To install the wall mount frame:
- Measure and mark the desired height of the toilet on the wall. The standard height is around 15 inches off the floor.
- Locate the studs in the wall using a stud finder and mark their position.
- Attach the metal brackets to the studs using screws. Make sure they are securely fastened.
- Attach the horizontal support bars to the metal brackets. Use a level to ensure they are perfectly horizontal.
- Secure the support bars to the brackets using the provided screws.
- Measure and mark the location of the waste pipe on the wall. Ensure that it aligns with the drainage system.
- Install the waste pipe through the hole in the wall and attach it to the drainage system.
- Attach the toilet tank mounting bracket to the support bars using the provided screws.
- Double-check the level of the support bars and make any necessary adjustments.
- Ensure that all connections are secure and tight.
Once the wall frame is securely installed, you can proceed with the rest of the installation process for the wall hung toilet.
| Tools needed: | Stud finder | Screws | Level |
|---|---|---|---|
| Materials needed: | Wall frame kit | Waste pipe | Toilet tank mounting bracket |
Locate and Mark the Wall Frame
Before installing a wall hung toilet, it is important to locate and mark the wall frame. The wall frame is the internal support structure that holds the toilet in place. By locating the wall frame, you will be able to securely attach the toilet and prevent any damage to the wall.
To locate the wall frame, you can use a stud finder. This tool will help you identify the vertical support beams behind the wall. Once you have located the frame, mark its position on the wall using a pencil.
Step 1: Prepare the Tools
To locate and mark the wall frame, you will need the following tools:
- Stud finder
- Pencil
Step 2: Use a Stud Finder
Turn on the stud finder and place it against the wall. Move it slowly in a horizontal direction until it indicates that a stud has been detected. The stud finder will usually make a sound or light up when it senses a stud.
Once the stud has been detected, move the stud finder vertically to determine the overall height of the wall frame. Mark the top and bottom of the wall frame using a pencil.
Step 3: Measure and Mark Additional Studs
In some cases, the wall frame may have multiple studs spaced evenly apart. To ensure a secure installation, measure the distance between the marked studs and use the stud finder to locate additional studs. Mark these studs along the height of the wall frame using a pencil.
If the studs are not evenly spaced, it is recommended to install additional supports or blocking to ensure proper support for the wall hung toilet.
By locating and marking the wall frame, you will be able to proceed with the installation process and have a secure and stable wall hung toilet. Remember to follow the manufacturer’s instructions and use the appropriate tools and materials for a successful installation.
Attach the Frame to the Wall
Before attaching the wall hung toilet to the frame, the first step is securely attaching the frame to the wall. This step is crucial to ensure the toilet is properly supported and can withstand the weight of a person.
1. Choose the position
Choose the desired position for your wall hung toilet. Make sure it is at the appropriate height and in a location suitable for plumbing connections.
2. Mark the holes
Place the frame against the wall and use a pencil to mark the locations of the screw holes. Ensure the frame is level by using a spirit level.
3. Drill the holes
Use a drill and appropriate drill bit to create the necessary holes in the wall at the marked locations. Take care to select a drill bit that suits the type of wall material you have.
4. Insert wall plugs
Gently tap appropriate-sized wall plugs into the drilled holes. The plugs should be flush with the surface of the wall to provide a secure anchor for the screws.
5. Attach the frame
Align the frame with the drilled holes and place it against the wall. Insert screws through the mounting holes on the frame and into the wall plugs. Use a screwdriver or appropriate tool to tighten the screws securely. Check that the frame is level and adjust if necessary.
Note: It is essential to use the screws provided with the frame or recommended by the manufacturer to ensure safe and proper installation.
Once the frame is securely attached to the wall, you can proceed to the next step of installing the wall hung toilet by following the manufacturer’s instructions.
Mounting the Toilet Bowl
Now that you have installed the mounting brackets, it’s time to mount the toilet bowl to the wall. Follow these steps:
Step 1: Prepare the Toilet Bowl
Before mounting the toilet bowl, make sure to remove any protective covers or packaging materials. Inspect the bowl for any damage or defects. If everything looks good, continue with the installation.
Step 2: Attach the Bowl to the Brackets
Place the toilet bowl on top of the mounting brackets. Make sure it is properly aligned. Gently push the bowl towards the wall, so it fits securely onto the brackets. You should feel it lock into place.
Use the screws provided to secure the bowl to the brackets. Insert the screws into the holes on both sides of the bowl and tighten them with a screwdriver. Make sure the bowl is securely fastened and doesn’t wiggle.
Step 3: Connect the Water Supply
Next, connect the water supply to the toilet bowl. This usually involves attaching a flexible hose or pipe from the valve to the bottom of the tank. Follow the manufacturer’s instructions for properly connecting the water supply.
Once the water supply is connected, turn on the water and check for any leaks. If there are no leaks, you are ready to use your newly installed wall hung toilet!
Secure the Toilet Bowl Bracket
Before proceeding with the installation of the wall hung toilet, it is important to securely attach the toilet bowl bracket to the wall. This bracket will act as a support for the weight of the toilet, so it needs to be properly mounted.
Begin by positioning the toilet bowl bracket at the desired height on the wall, ensuring that it is level. Use a pencil to mark the position of the screw holes on the wall.
Next, use a drill to create pilot holes at the marked positions. This will help prevent any damage to the wall and make it easier to insert the screws. Make sure to use a drill bit that is slightly smaller than the size of the screws.
Once the pilot holes are ready, align the bracket with the holes and use a screwdriver or a screw gun to tighten the screws into place. Ensure that the bracket is securely attached to the wall, as this will provide the stability needed for the wall hung toilet.
After the toilet bowl bracket is securely mounted, you can proceed with attaching the toilet bowl to the bracket. Carefully lift the toilet bowl and slide it onto the bracket, making sure that it sits flush against the wall and is securely locked in place.
Remember to refer to the manufacturer’s instructions for any specific requirements or guidelines for your specific wall hung toilet model.
Meet Harrison Clayton, a distinguished author and home remodeling enthusiast whose expertise in the realm of renovation is second to none. With a passion for transforming houses into inviting homes, Harrison's writing at https://thehuts-eastbourne.co.uk/ brings a breath of fresh inspiration to the world of home improvement. Whether you're looking to revamp a small corner of your abode or embark on a complete home transformation, Harrison's articles provide the essential expertise and creative flair to turn your visions into reality. So, dive into the captivating world of home remodeling with Harrison Clayton and unlock the full potential of your living space with every word he writes.
