How to hang paste the wall wallpaper
Wallpapering is a great way to transform your living space and add a touch of personal style. If you’re considering hanging paste the wall wallpaper, you’re in luck! This modern wallpaper solution eliminates the need for a wallpaper adhesive, making installation easier and less messy.
But how exactly do you hang paste the wall wallpaper? It’s actually quite simple. In this guide, we’ll walk you through the necessary steps to ensure a successful installation. From preparing the wall to matching pattern repeats, you’ll learn all the essential techniques to achieve a professional-looking finish.
Step 1: Prepare Your Wall
Before beginning the installation process, it’s crucial to ensure that your wall is clean, smooth, and dry. Remove any loose wallpaper or paint, and repair any damages or imperfections on the surface.
Step 2: Measure and Cut
Measure the height of your wall, adding a few extra inches at the top and bottom for trimming. Roll out the wallpaper on a flat surface, pattern side down, and using a tape measure and pencil, measure and mark the desired length. Cut the wallpaper along the marked line, taking care to make straight and clean cuts.
Step 3: Apply the Paste
Using a roller or brush, apply a generous amount of paste directly onto the wall. It’s important to work quickly, as paste the wall wallpaper tends to dry faster. Make sure to spread an even layer from ceiling to floor, focusing on one small area at a time.
Step 4: Hang the Wallpaper
Start at one corner of the wall and carefully place the top of the wallpaper onto the pasted area. Slowly roll out the wallpaper, applying light pressure with a smoothing brush or sponge to eliminate any air bubbles or wrinkles. Continue this process until you’ve reached the other end of the wall, ensuring that the wallpaper lines up correctly and the pattern is consistent.
Step 5: Trim Excess Wallpaper
Once the wallpaper is fully hung, use a sharp utility knife or wallpaper trimmer to trim excess paper at the top and bottom of the wall. Take your time and make precise cuts to achieve a clean and neat finish.
By following these steps, you can easily hang paste the wall wallpaper and transform your space with minimal hassle. Don’t be afraid to unleash your creativity and experiment with different patterns and designs to make a statement in your home. Good luck!
Tips for hanging paste the wall wallpaper
When installing paste the wall wallpaper, following these tips can ensure a smooth and successful application:
1. Prepare the wall
Prior to hanging the wallpaper, it is essential to prepare the wall surface. Make sure the wall is clean, dry, and free of any loose or flaking paint. Patch any holes or imperfections and sand the wall if needed. This will help the wallpaper adhere properly to the wall.
2. Measure and cut accurately
Measure the dimensions of the wall and carefully cut the wallpaper accordingly. It’s crucial to ensure accurate measurements to avoid wastage and improper fitting. Use a sharp utility knife or wallpaper scissors for precise cutting.
3. Apply adhesive directly to the wall
With paste the wall wallpaper, you don’t need to coat the wallpaper itself with adhesive. Instead, apply a generous layer of wallpaper paste directly onto the wall using a roller or brush. Make sure to cover the entire length/width of the area where the wallpaper will be placed.
4. Align the wallpaper carefully
Start by hanging the first strip of wallpaper at a vertical edge of the wall, using a plumb line as a guide for straight application. Smooth the wallpaper onto the adhesive-covered wall with a wallpaper brush or sponge, working from the top to the bottom and ensuring there are no air bubbles.
5. Trim excess wallpaper
Once the wallpaper is properly aligned and smoothed, trim any excess material at the top and bottom using a straight edge and a sharp knife. Be careful not to cut into the wall or leave any jagged edges.
By following these tips, you can hang paste the wall wallpaper like a professional, achieving a beautiful and seamless finish.
Gather the necessary tools and materials
Before you hang paste the wall wallpaper, it is important to ensure that you have all the necessary tools and materials. This will make the process smoother and more efficient. Here is a list of what you will need:
Tools:
- Wallpaper brush
- Wallpaper scissors
- Sponge or cloth
- Plumb line or spirit level
- Seam roller
- Bucket or tray for paste
- Tape measure
- Pencil
- Smoothing brush
- Utility knife
- Step ladder or stool
Materials:
| Quantity | Item |
|---|---|
| 1 roll per wall | Paste the wall wallpaper |
| Wallpaper adhesive | Paste or powder |
| Dropsheets or tarps | For protecting the floor or furniture |
| Clean water | For mixing the paste |
| Sugar soap or mild detergent | For preparing the walls |
| Primer/sealer | Optional, for improved adhesion |
| Paint roller and tray | For applying primer/sealer |
Make sure you have all the materials and tools readily available before you start hanging the wallpaper. It is also important to prepare the walls properly before applying the wallpaper. Taking the time to gather the necessary tools and materials will ensure that the job is done correctly and efficiently.
Prepare the wall and the wallpaper
Before you begin hanging paste the wall wallpaper, it is important to properly prepare both the wall surface and the wallpaper itself. Taking the time to adequately prepare will help ensure a smooth and successful installation.
Prepare the wall:
1. Clean the wall surface thoroughly to remove any dirt, dust or grease. Use a mild detergent mixed with water and a sponge to gently clean the wall. Allow the wall to dry completely before proceeding.
2. If there are any existing imperfections on the wall such as cracks, holes or uneven areas, repair them before hanging the wallpaper. Fill any cracks or holes with a suitable filler and smooth out any uneven areas with sandpaper.
3. Make sure the wall is smooth and flat before applying the wallpaper. Use a sanding block or sandpaper to remove any bumps or rough spots. It is important to have a smooth surface to achieve the best results.
Prepare the wallpaper:
1. Lay out the wallpaper pattern-side down on a clean, dry surface. Check for any defects or damages and make sure the rolls are in good condition before hanging. Measure and cut the wallpaper strips to the desired length, taking into account any pattern repeat.
2. Read the manufacturer’s instructions for the wallpaper you are using. Some wallpapers may require pre-soaking in water or pre-booking before hanging. Follow the instructions provided to ensure the best adherence and finish.
By properly preparing the wall and the wallpaper before hanging paste the wall wallpaper, you will increase the likelihood of a successful installation and achieve a professional-looking result.
Hang the wallpaper and apply the paste
Once you have prepared the wall and measured your wallpaper, it’s time to hang it and apply the paste. Follow these steps to ensure a smooth and successful installation:
Step 1: Gather your materials
Before you begin, make sure you have all the necessary materials handy. This includes the wallpaper, paste, wallpaper brush or roller, scissors, and a damp cloth for cleanup.
Step 2: Start at a corner
Begin by hanging the first strip of wallpaper at a corner of the wall. It’s essential to start in a corner as it provides a reference point for alignment.
Step 3: Apply the adhesive paste
Using a wallpaper brush or roller, evenly apply a thin layer of adhesive paste on the back of the wallpaper. Ensure that you cover the surface completely but avoid over-applying the paste to prevent seepage.
Step 4: Fold and “book” the wallpaper
To activate the paste and prevent drying while you prepare the next strip, fold the wallpaper in on itself, paste side to paste side, and let it “book.” Use the edges or corners of the folded wallpaper to hold it together. This process allows the paste to penetrate the wallpaper evenly.
Step 5: Hang the wallpaper
Once the length of wallpaper is booked, carefully position it against the wall, ensuring the top aligns with the ceiling or cornice. Slowly unbook the wallpaper, smoothing it onto the wall as you go. Use a wallpaper brush or roller to eliminate any air bubbles or wrinkles.
Step 6: Repeat steps 3 to 5
Continue applying adhesive paste, booking, and hanging each strip of wallpaper in the desired pattern. Remember to match the patterns accurately for a seamless finish.
Step 7 : Trim and clean up
After the wallpaper is in place, use a pair of sharp scissors to trim any excess along the edges and corners. Clean up any excess paste using a damp cloth, being careful not to smudge or damage the wallpaper.
Following these steps and taking your time when hanging paste the wall wallpaper will help ensure a professional-looking result.
Meet Harrison Clayton, a distinguished author and home remodeling enthusiast whose expertise in the realm of renovation is second to none. With a passion for transforming houses into inviting homes, Harrison's writing at https://thehuts-eastbourne.co.uk/ brings a breath of fresh inspiration to the world of home improvement. Whether you're looking to revamp a small corner of your abode or embark on a complete home transformation, Harrison's articles provide the essential expertise and creative flair to turn your visions into reality. So, dive into the captivating world of home remodeling with Harrison Clayton and unlock the full potential of your living space with every word he writes.
