How to get bobbles off jumpers
Do you have a beloved jumper that is covered in unsightly bobbles? Don’t worry, we’re here to help! Getting rid of bobble is easier than you might think, and with a little bit of patience, your jumper can look as good as new.
Firstly, it’s important to understand why jumpers get bobbles in the first place. Bobbles, also known as pills, form when the fabric of the jumper rubs against itself or other surfaces, causing small fibers to clump together. This is a common occurrence with natural fibers such as wool and cashmere, but it can happen with synthetic fabrics as well.
To remove bobble from your jumper, start by gently pulling or picking them with your fingers. Be careful not to pull too hard, as this can damage the fabric. If finger-picking isn’t doing the trick, you can also try using a fine-toothed comb or a lint roller. These tools are designed to catch and remove the bobbles without causing any harm.
In some cases, the bobbles may be too stubborn to remove with just your fingers or a comb. If this is the case, don’t worry! There are other methods you can try. One popular technique is to use sticky tape or adhesive lint remover. Simply stick the tape onto the bobbles and then peel it off, taking the bobbles with it. Repeat this process until all the bobbles are removed.
Another effective method is to use a fabric shaver or electric de-bobbler. These devices work by gently removing the bobbles with rotating blades. They are specifically designed for this purpose and can be a great investment if you often find yourself battling with bobbles on your jumpers.
Once you’ve successfully removed the bobbles, it’s important to take preventative measures to keep them from coming back. This can include washing your jumper inside out, using a garment bag, and avoiding rubbing it against surfaces that can cause friction. By taking these steps, you can keep your jumpers looking smooth and bobble-free for longer.
In conclusion, getting bobbles off jumpers is a straightforward process that can be easily done at home. Whether you choose to pick them off with your fingers or invest in a fabric shaver, the end result will be a jumper that looks fresh and ready to wear. So don’t let those bobbles ruin your favorite jumper – take action and restore it to its former glory!
Step-by-step guide to remove bobbles from jumpers
- Start by laying your jumper flat on a clean surface. This will make it easier to work with and help you see the bobbles more clearly.
- Take a close look at the jumper and identify the areas where the bobbles are most concentrated.
- Gently hold the fabric taut with one hand and use a lint shaver or a fabric comb in your other hand to carefully remove the bobbles. Make sure to move the shaver or comb in a smooth, downward motion to avoid damaging the fabric.
- Work on one small section at a time, focusing on the areas with the most visible bobbles first. Continue combing the fabric until all the bobbles have been removed from that section.
- Once you finish one section, move on to the next, following the same procedure. Take your time and be patient – this process can take a while depending on how many bobbles your jumper has.
- When you have removed all the bobbles from your jumper, inspect it closely to check if any bobbles remain. If you notice any missed areas, go back and repeat the process until you’re satisfied.
- Once you’re happy with the results, give your jumper a gentle shake to remove any loose fibres or lint that may have accumulated during the process.
- Finally, store your jumper in a clean, dry place to prevent any new bobbles from forming. Avoid wearing it with materials that are prone to shedding or easily snag the fabric.
Now you know how to remove bobbles from jumpers, it’s time to rescue your favourite garments from those unsightly bobbles. Enjoy wearing your renewed jumper with confidence!
Tips for getting rid of bobbles on jumpers
1. Use a fabric shaver
Invest in a good quality fabric shaver. This small handheld device contains rotating blades that gently remove the bobbles by cutting them down to size. Follow the instructions on the fabric shaver and move the device in a circular motion over the bobbles to remove them.
2. Try an adhesive lint roller
If the bobble problem is not too severe, you can use an adhesive lint roller to remove them. Simply roll the lint roller over the surface of the jumper, applying gentle pressure. The sticky surface of the lint roller will pick up the bobbles and remove them from the fabric.
3. Use a pumice stone
For more delicate jumpers or those made of natural fibers like wool, a pumice stone can be a gentle yet effective option. Wet the pumice stone with water and gently rub it over the bobbles in a circular motion. Be careful not to apply too much pressure to avoid damaging the fabric.
4. DIY methods using household items
There are a couple of household items you can use to tackle bobbles on your jumper. One option is to use a Velcro hair roller by gently rolling it over the bobbled areas. Alternatively, you can use a fine-toothed comb and lightly brush it over the bobbles to remove them.
Remember, prevention is better than cure when it comes to bobbles. To keep your jumpers in excellent condition, it’s a good idea to avoid wearing them with rough jewelry or items that can catch on the fabric. Additionally, always check the care label before washing your jumpers, and consider handwashing or using a gentle machine cycle to minimize the risk of bobbles forming.