How to fit bosch aerotwin wiper blades

When it comes to ensuring clear vision while driving, having high-quality wiper blades is essential. Bosch Aerotwin wiper blades are known for their outstanding performance and durability. If you are looking to replace your old wiper blades with new Bosch Aerotwin blades, you have come to the right place. In this article, we will guide you through the process of fitting Bosch Aerotwin wiper blades, step by step.

First, make sure you have the correct Bosch Aerotwin wiper blades for your vehicle. Consult your vehicle’s manual or use the Bosch website to find the right size and fitment for your car. It’s important to choose the correct blades to ensure optimal performance and fit.

Next, locate the old wiper blades on your vehicle. To remove them, lift the wiper arm away from the windshield until it stays in an upright position. To release the old wiper blade, press the small plastic tab or button located near the joint where the blade connects to the wiper arm. Once pressed, gently pull the old blade away from the wiper arm.

Now it’s time to install the new Bosch Aerotwin wiper blade. Make sure the wiper blade is facing the correct direction; the curved side of the blade should be facing the windshield. Align the new blade’s plastic clip with the corresponding hook on the wiper arm. Push the clip firmly until you hear a click or feel it securely lock in place.

Finally, carefully lower the wiper arm back down onto the windshield. Move the blade along the windshield and check if it is properly positioned and glides smoothly over the glass. Test the wipers by turning them on and observing their performance.

Window Squeegees,Rubber Glass Wiper Blades for Bath, Kitchen and Car-Blue Handle 1P.
Window Squeegees,Rubber Glass Wiper Blades for Bath, Kitchen and Car-Blue Handle 1P.
£2.99
Amazon.co.uk
Amazon price updated: November 4, 2024 12:09 pm

By following these simple steps, you can easily fit Bosch Aerotwin wiper blades on your vehicle. Remember to replace your wiper blades regularly for optimal performance and safety. Don’t compromise on your vision – choose Bosch Aerotwin wiper blades and enjoy clear visibility every time you hit the road.

Section 1: Preparing for Installation

Before you start replacing your wiper blades with Bosch Aerotwin, it’s essential to prepare yourself and gather the necessary tools. This section guides you through the steps you need to take before installation.

1. Gather the required tools

To install the Bosch Aerotwin wiper blades, you will need the following tools:

  • Flathead screwdriver or a trim removal tool
  • Soft cloth or towel

2. Ensure the wiper arm is in the correct position

Prior to removing the old wiper blades, make sure the wiper arm is in the correct parking position to avoid any damage. Start by turning off the ignition and ensuring the wipers are at the bottom of their sweep.

See also  How to make coronation chicken sauce

If the wipers are not in the correct position, follow these steps:

JVL Hand Held Wiper Blade Window Squeegee, Turquoise/Grey,
JVL Hand Held Wiper Blade Window Squeegee, Turquoise/Grey,
£3.99
£3.08
Amazon.co.uk
Amazon price updated: November 4, 2024 12:09 pm
  1. Turn on the ignition briefly.
  2. Wait for the wiper motor to complete its motion and shut it off.
  3. Manually adjust the wiper arm to the bottom of the windshield, or consult your vehicle’s manual for arm adjustment instructions.

Once the wiper arm is properly positioned, you are ready to proceed with the installation of your Bosch Aerotwin wiper blades.

Section 2: Removing the Old Wiper Blades

To begin the process of fitting your new Bosch Aerotwin wiper blades, you will first need to remove the old wiper blades from your vehicle.

1. Start by lifting the wiper arm away from the windshield, allowing it to lock in an upright position.

Note: Be careful not to let the wiper arm snap back onto the windshield as this could cause damage.

2. Locate the small tab or release mechanism on the wiper blade where it attaches to the arm.

Bosch Wiper Blade Rear H309, Length: 300mm – Rear Wiper Blade
Bosch Wiper Blade Rear H309, Length: 300mm – Rear Wiper Blade
£5.45
Amazon.co.uk
Amazon price updated: November 4, 2024 12:09 pm

3. Press down firmly on the tab or release mechanism while applying slight pressure towards the windshield. This will disengage the wiper blade from the arm.

Caution: The blade may spring outward once it is released, so be prepared to catch it to prevent scratching the windshield.

4. Gently remove the old wiper blade from the arm by pulling it straight out. You may need to wiggle it slightly if it is stuck.

Important: Take note of how the old wiper blade is attached to the arm as this will help you when installing the new blade.

5. Repeat the process for the other wiper blade if necessary.

Bosch Wiper Blade Rear H354, Length: 350mm – Rear Wiper Blade
Bosch Wiper Blade Rear H354, Length: 350mm – Rear Wiper Blade
£6.37
£5.75
Amazon.co.uk
Amazon price updated: November 4, 2024 12:09 pm

Now that you have successfully removed the old wiper blades, you are ready to install the new Bosch Aerotwin wiper blades. Proceed to Section 3 for the next steps.

Section 3: Installing the Bosch Aerotwin Wiper Blades

Proper installation of the Bosch Aerotwin wiper blades is essential to ensure optimal performance. This section will guide you through the steps involved in fitting these wiper blades to your vehicle.

Step 1: Remove the old wiper blades

Start by lifting the wiper arm away from the windshield, taking care not to let it snap back onto the glass. Locate the small tab or release lever where the wiper blade connects to the arm. Press this tab or lever and carefully slide the old blade out of the hook mechanism. Repeat this process for the other blade.

See also  How to hold billiard stick

Step 2: Prepare the new Bosch Aerotwin wiper blades

Before installing the new AeroTwin blades, ensure they are the correct size for your vehicle by referring to the Bosch Aerotwin application guide or consulting your vehicle’s manual. Remove the protective covers from the new blades, being careful to avoid touching the rubber wiping surface. For twin-arm wiper systems, make sure to correctly orientate the new blades (one shorter, one longer) to match the arm lengths.

Step 3: Attach the new Bosch Aerotwin wiper blades

With the wiper arms lifted away from the windshield, position the open hook end of the Aerotwin blade within the wiper arm hook mechanism. Align the hook attachment of the blade with the arm and press it in until you hear a clicking sound, indicating it is securely locked in place. Repeat this process for the other blade.

Bosch Wiper Blade Rear H301, Length: 300mm
Bosch Wiper Blade Rear H301, Length: 300mm
£7.63
£5.90
Amazon.co.uk
Amazon price updated: November 4, 2024 12:09 pm

Step 4: Test the wiper blades

Before using the wiper blades, it is crucial to test them to ensure they are properly attached. Lower the wiper arms back onto the windshield and activate the wiper system at the lowest speed setting. Observe the blades to ensure smooth and quiet operation, with full coverage and no streaking or lifting off the glass. If any issues are noted, remove and reattach the blades to ensure correct installation.

Following these steps will allow for the successful installation of the Bosch Aerotwin wiper blades on your vehicle. Properly installed wiper blades will provide an optimal wiping experience, ensuring clear visibility during inclement weather conditions.

Step Description
Step 1 Remove the old wiper blades
Step 2 Prepare the new Bosch Aerotwin wiper blades
Step 3 Attach the new Bosch Aerotwin wiper blades
Step 4 Test the wiper blades

Section 4: Adjusting and Testing the Blades

Once you have installed the Bosch Aerotwin wiper blades on your vehicle, it is important to adjust them properly to ensure maximum performance. Follow these steps to adjust and test the blades:

Step 1: Start by sliding the wiper arm away from the windshield. This will give you better access to the blades and make it easier to adjust them.

Step 2: Locate the hinge where the wiper blade connects to the wiper arm. This hinge allows for adjustment of the blade angle.

Bosch Wiper Blade Rear H840, Length: 290mm – Rear Wiper Blade, black
Bosch Wiper Blade Rear H840, Length: 290mm – Rear Wiper Blade, black
£6.15
Amazon.co.uk
Amazon price updated: November 4, 2024 12:09 pm

Step 3: Use a small screwdriver to lift the hinge cover, if there is one, and expose the hinge mechanism.

Step 4: Once the hinge mechanism is exposed, you can adjust the blade angle. The ideal angle is when the blade rests evenly on the windshield and maintains maximum contact with the glass.

See also  How to contour your face older woman

Step 5: To adjust the angle, gently push or pull the blade in the desired direction. Be careful not to force it, as this can damage the wiper arm or blade.

Step 6: After making the necessary adjustments, close the hinge cover if you removed it earlier.

Step 7: To test the wiper blades, turn on your vehicle’s wiper system and observe their performance. Check that the blades glide smoothly and cleanly across the windshield, without leaving streaks or squeaking noises. If any issues are noticed, repeat the adjustment process.

DHA Car Window Windscreen Wiper Blade Arm Puller Remover Removal tool, Battery Terminal Small Bearing Puller Remover Repair Tool
DHA Car Window Windscreen Wiper Blade Arm Puller Remover Removal tool, Battery Terminal Small Bearing Puller Remover Repair Tool
£8.45
Amazon.co.uk
Amazon price updated: November 4, 2024 12:09 pm

Keep in mind that proper adjustment is essential for optimal wiper blade performance. Adjusting the blades may be necessary after installation or when they are not performing as expected. By following these steps, you can ensure that your Bosch Aerotwin wiper blades are properly adjusted and providing the best visibility in all weather conditions.

Section 5: Maintaining Bosch Aerotwin Wiper Blades

Proper maintenance is essential to ensure optimal performance and longevity of Bosch Aerotwin wiper blades.

Here are some tips to help you maintain your wiper blades:

1. Regular Cleaning: It is important to clean the rubber blade regularly to remove any dirt or debris that may accumulate. Wiping it with a damp cloth or using a mild detergent can help keep the rubber in good condition.

2. Inspecting for Damage: Periodically inspect the wiper blades for any signs of damage such as cracks, tears, or bent frames. Damaged blades should be replaced immediately to prevent any compromise in performance.

3. Replacing Rubber Inserts: Over time, the rubber insert on the wiper blade may wear out and lose its effectiveness. It is recommended to replace them every 6 to 12 months or when you notice a decline in wiping performance.

4. Avoid Excessive Heat or Cold: Extreme temperature conditions, such as excessive heat or freezing cold, can affect the performance of wiper blades. When parking under direct sunlight or in winter conditions, try raising the wiper blades from the windshield or using a wiper cover to protect them.

5. Proper Storage: If you are not using your vehicle for an extended period, make sure to properly store the wiper blades. Lift the wiper arms away from the windshield to relieve pressure on the blades and help maintain their shape.

Following these tips will help ensure that your Bosch Aerotwin wiper blades continue to provide a clear view of the road, ensuring your safety and the safety of other road users.

Harrison Clayton
Harrison Clayton

Meet Harrison Clayton, a distinguished author and home remodeling enthusiast whose expertise in the realm of renovation is second to none. With a passion for transforming houses into inviting homes, Harrison's writing at https://thehuts-eastbourne.co.uk/ brings a breath of fresh inspiration to the world of home improvement. Whether you're looking to revamp a small corner of your abode or embark on a complete home transformation, Harrison's articles provide the essential expertise and creative flair to turn your visions into reality. So, dive into the captivating world of home remodeling with Harrison Clayton and unlock the full potential of your living space with every word he writes.

The Huts Eastbourne
Logo