How to drain beko washing machine
If you own a Beko washing machine, you may occasionally encounter situations where you need to drain the water from it. Whether it’s because of a clog, a malfunctioning pump, or simply because you forgot to do it earlier, draining the machine is a necessary process.
To drain a Beko washing machine, you can follow these simple steps. First, make sure that the machine is unplugged to avoid any potential hazards. You should also turn off the water supply to the machine to prevent any further flooding. Once these safety measures are in place, you can proceed with the draining process.
Locate the drain hose at the back of the machine. It is typically located near the bottom and may be attached to a drain pipe or a wall. Carefully detach the hose from the drain pipe or wall, ensuring that you have a bucket or a basin nearby to catch any water that may flow out. Once the hose is detached, lower it towards the bucket or basin and let gravity do its magic.
If the water does not start flowing immediately, it may be helpful to use a long, flexible pipe or a drain snake to gently coax any blockages out of the drain pipe. Be sure to use caution when doing this to avoid causing any further damage to the machine or the plumbing system. Once the water begins to drain, you can reconnect the hose and proceed with cleaning or repairing your Beko washing machine as needed.
Simple Steps to Drain a Beko Washing Machine
If you have a Beko washing machine and need to drain the water from it, there are simple steps you can follow to quickly and effectively complete the process. Here is a step-by-step guide:
![Washing Machine (Washer Releasing Water into Drain) [Sound Effect]](https://m.media-amazon.com/images/I/51ALKPN4emL._SS520_.jpg)
Step 1: Turn off the Power
Before attempting to drain the machine, make sure to turn off the power. This can be done by unplugging the machine or turning off the circuit breaker that supplies power to the washer.
Step 2: Locate the Drain Hose
The next step is to locate the drain hose. This is usually located at the back of the machine near the bottom. Once you find it, make sure it is not twisted or kinked, as this can obstruct the flow of water.
Step 3: Position a Basin or Bucket
Place a basin or bucket underneath the drain hose to collect the water. Make sure it is large enough to hold the amount of water in the machine.
Step 4: Remove the Drain Plug
Depending on the model of your Beko washing machine, it may have a drain plug that needs to be removed. If this is the case, use pliers or a wrench to unscrew the plug and allow the water to flow out.
Step 5: Open the Drain Filter
If your Beko washing machine does not have a drain plug, you can access the drain filter. Look for a circular cover on the front lower part of the machine and remove it. Inside, you will find a valve or a handle that can be turned to open the drain filter. Once open, the water will start to flow out.
Step 6: Let the Water Drain
Allow the water to drain completely into the basin or bucket. This may take a few minutes depending on the amount of water in the machine. It is essential to ensure the drainage is complete before moving on to the next step.
Step 7: Clean and Secure the Drain Hose/Filer
Once the water has drained, clean the drain hose or filter to remove any debris that may have accumulated. Once cleaned, reposition and secure the drain hose or close the drain filter securely.
Step 8: Restore Power
Finally, restore the power by plugging the machine back in or resetting the circuit breaker. Your Beko washing machine is now drained and ready to use again.
Turn off the Power
Before draining your Beko washing machine, it is essential to ensure the power source is turned off. This will help prevent any electrical mishap or damage to the machine.
In order to turn off the power, follow these steps:
- Unplug the washing machine: Locate the power cord connected to the back of the machine and unplug it from the electrical outlet. This will disconnect the washing machine from the power supply.
- Switch off the circuit breaker: Find the circuit breaker box in your home or laundry area. Look for the breaker labeled for the washing machine and flip it to the “off” position. This will completely cut off power to the machine and ensure its safety.
Once the power is turned off, you can proceed with draining the Beko washing machine without any risk of electrical hazards. Remember to consider your safety at all times when handling electrical appliances.
Locate the Drain Pump Filter
When your Beko washing machine is not draining properly, one of the most common causes is a clogged drain pump filter. The drain pump filter is responsible for catching debris like lint, coins, and hair to prevent it from clogging the drain pump or causing damage to the washing machine. To fix this issue, you will need to locate and clean the drain pump filter. Here is a step-by-step guide on how to do it:
Step 1: Turn off the machine and unplug it
Before starting any maintenance work on your washing machine, always ensure that it is turned off and unplugged. This will prevent any accidents or damage during the process.
Step 2: Find the drain pump access panel
The drain pump access panel is typically located at the bottom of the washing machine. Look for a small rectangular or circular panel that can be easily removed.
Step 3: Remove the drain pump access panel
Using a screwdriver or a coin, depending on the brand and model of your Beko washing machine, carefully unscrew or open the access panel. Set it aside in a safe place.
Step 4: Locate the drain pump filter
Once the access panel is removed, you will see the drain pump filter. It is usually a plastic or rubber component with a handle or knob for easy removal.
Step 5: Remove and clean the drain pump filter
Turn the handle or knob counterclockwise to loosen and remove the drain pump filter. Be prepared for some water to come out, so have a towel or bucket ready to catch any spills. Once removed, discard any debris trapped in the filter and clean it thoroughly under running water.
Note: Some models may have a small drainage pipe or hose attached to the drain plug filter. If your washing machine has this feature, remove the hose and clean it separately.
Step 6: Reinstall the drain pump filter
After cleaning the drain pump filter, carefully reinsert it back into its original position. Turn the handle or knob clockwise to secure it tightly.
Step 7: Replace the drain pump access panel
Align the access panel with the opening and secure it with the screws or closure mechanism. Make sure it is properly sealed to prevent any leaks.
By following these steps, you should be able to successfully locate and clean the drain pump filter in your Beko washing machine. Regularly cleaning the drain pump filter will help prevent drainage problems and ensure the efficient operation of your appliance.
Unscrew the Filter Cap
To drain the Beko washing machine, the first step is to unscrew the filter cap. Locate the filter cap, which is typically located at the bottom front of the machine. You may need to remove a small panel to access it. Once you’ve located the cap, use a large flathead screwdriver or a coin to rotate it counterclockwise and loosen it.
Be careful when unscrewing the filter cap, as some water may still be inside. It’s a good idea to place a towel or bucket underneath to catch any spills. Slowly unscrew the filter cap, allowing any water to drain into the towel or bucket. If necessary, cautionsly tip the machine forwards or alevate the front slightly to aid the drainage process, keeping in mind that washing machines can be heavy.
Once all the water has been drained, remove the filter cap completely and clean it thoroughly. Remove any debris or blockages that may have accumulated, such as lint, coins or small items. Inspect the filter housing as well and clean it if necessary.
After cleaning the filter and the filter cap, securely tighten the cap back into place by rotating it clockwise. Ensure that it is tightly secured to prevent any leaks during the next wash cycle.
Drain the Water
To drain the water from your Beko washing machine, you can follow these steps:
Step 1: Turn Off the Washing Machine
Firstly, you need to make sure that the washing machine is turned off. This is important to ensure your safety during the drainage process.
Step 2: Locate the Drain Hose
Next, you will need to locate the drain hose of your Beko washing machine. The drain hose is usually positioned at the back of the machine near the bottom. It is a flexible tube connected to the drainage system.
Step 3: Prepare a Drainage Point
You will need to prepare a drainage point for the water to flow into. This could be a nearby sink or a bucket placed on the floor. Make sure the drainage point is secure and can handle the volume of water in the machine.
Step 4: Position the Drain Hose
Now, position the end of the drain hose into the drainage point you have prepared. Ensure that it is secured and will not come loose during the drainage process.
Step 5: Remove the Plug
Depending on the model of your Beko washing machine, you may need to remove the plug on the drain hose. This plug prevents water from leaking out when the machine is in use. Check the user manual or the machine itself to see if a plug needs to be removed.
Step 6: Open the Emergency Drainage Cap
If your Beko washing machine has an emergency drainage cap, locate it and open it. This will allow the water to start draining from the machine.
Step 7: Allow Water to Drain
Once you have completed the previous steps, the water from your Beko washing machine should start draining. You can monitor the drainage process and ensure that the water is flowing into the drainage point without any issues.
Step 8: Clean the Filter (Optional)
While the water drains from the machine, you might want to consider cleaning the filter as well. The filter is located near the bottom of the machine and can be accessed by removing a cover. Cleaning the filter helps prevent any clogs or obstructions in the drainage system.
| Important Things to Remember |
|---|
| Make sure the washing machine is turned off before starting the drainage process. |
| Ensure the drainage point can handle the volume of water from the machine. |
| If applicable, remove the plug on the drain hose before draining the water. |
| Consider cleaning the filter while the water is draining to prevent any future issues. |
By following these steps, you will be able to successfully drain the water from your Beko washing machine.
Meet Harrison Clayton, a distinguished author and home remodeling enthusiast whose expertise in the realm of renovation is second to none. With a passion for transforming houses into inviting homes, Harrison's writing at https://thehuts-eastbourne.co.uk/ brings a breath of fresh inspiration to the world of home improvement. Whether you're looking to revamp a small corner of your abode or embark on a complete home transformation, Harrison's articles provide the essential expertise and creative flair to turn your visions into reality. So, dive into the captivating world of home remodeling with Harrison Clayton and unlock the full potential of your living space with every word he writes.
