How to clean a burnt coil

Whether you are a beginner or an experienced vaper, dealing with a burnt coil is an annoying and common problem. A burnt coil can not only ruin the taste of your vape but also give off an unpleasant burnt smell. Luckily, there are steps you can take to clean a burnt coil and restore it to its optimal performance.

The first step in cleaning a burnt coil is to remove it from your vaping device. Make sure that the coil has completely cooled down before attempting to clean it. Once the coil is removed, carefully inspect it for any signs of damage such as blackened or melted areas. If the coil has significant damage, it might be best to replace it entirely.

For a less severely damaged coil, you can start the cleaning process by rinsing it under warm water. Gently remove any residue or debris that might be stuck to the coil’s surface. Do not use any harsh cleaning agents as they can damage the coil. Instead, opt for mild dish soap to clean the coil.

Guide to Cleaning a Burnt Coil

Over time, it is common for coils in electronic devices, such as vape pens or e-cigarettes, to become burnt. When a coil burns, the taste and overall vaping experience can be affected. Cleaning a burnt coil can help restore the flavor and extend the lifespan, saving you money in the long run.

Step 1: Disassembling the Device

The first step in cleaning a burnt coil is to disassemble the device. This typically involves unscrewing the tank or cartridge from the battery or mod. Depending on the device, you may need a screwdriver or simply your hands to do this. Ensure that the device is turned off to prevent any accidents or mishaps.

Step 2: Removing the Coil

Once the device is disassembled, locate the coil inside the tank or cartridge. Using a pair of tweezers or your fingers, carefully remove the burnt coil from the device. Be cautious as the coil may still be hot, causing burns or injury.

Step 3: Cleaning the Burnt Coil

Fill a bowl or glass with isopropyl alcohol or vodka. Place the burnt coil in the bowl and let it soak for approximately 30 minutes. Gently swish the coil around in the liquid to dislodge any built-up residue or debris. After soaking, remove the coil and rinse it thoroughly with warm water to remove any remaining alcohol or vodka. Pat dry with a clean towel and let it air dry for some time.

Step 4: Reassembling the Device

Once the cleaned coil is dry, you can reassemble the device. Place the coil back into the tank or cartridge, ensuring it is installed correctly, and reattach it to the battery or mod. Double-check that everything is securely fastened.

Step 5: Priming the Coil

Prior to using the device again, it is crucial to “prime” the coil. This involves saturating the coil with e-liquid to prevent it from burning out quickly. Add a few drops of e-liquid onto the cotton wick of the coil and onto the exposed coil wire. Let the coil sit for around 5-10 minutes to allow the e-liquid to fully saturate the cotton before using the device.

See also  How to preserve chillies

Following these steps for cleaning a burnt coil regularly can help maintain the quality and performance of your vaping device. Remember to always use caution when handling burnt coils and allowing them to cool before cleaning to avoid accidents.

Understanding the Issue

Before you can effectively clean a burnt coil, it is important to understand why it happened in the first place.

A burnt coil often occurs when the coil in your vaping device has been subjected to extreme temperatures or has been used for an extended period without proper maintenance. This can lead to a buildup of debris, residue, and leftover e-liquid, which can cause your coil to burn out.

Aside from poor maintenance, using high-wattage settings can also contribute to a burnt coil. The increased power output can put excessive strain on the coil, causing it to overheat and result in a burnt taste.

It is also possible that the type of e-liquid you are using may be a contributing factor to a burnt coil. E-liquids with a high concentration of sweeteners or a high glycerin content can be more likely to cause buildup and result in a burnt coil.

Now that you have a better understanding of why a coil may burn out, let’s explore how you can clean and maintain your coil to extend its lifespan.

Preparation and Safety

Prior to cleaning a burnt coil, it is important to follow certain preparation steps for safety reasons. These steps will help ensure that you clean the coil properly and minimize potential risks.

1. Disconnect the Power Source

Firstly, ensure that your vaping device is turned off and disconnected from the power source. This will prevent any accidental firing of the coil during the cleaning process, which could potentially cause harm.

2. Gather Necessary Materials

Next, gather the materials needed for cleaning the burnt coil. You will need a small bowl or container, distilled water, rubbing alcohol, cotton swabs or a soft brush, and paper towels or a clean cloth. Make sure all these materials are readily available before you begin.

Also, ensure that you are working in a well-ventilated area to avoid inhaling any fumes from the rubbing alcohol during the cleaning process.

It is advisable to wear disposable gloves during the cleaning process to protect your hands from any chemicals and residues.

3. Remove the Coil

Before cleaning the burnt coil, remove it from your vaping device. Consult the user manual for instructions on how to remove the coil properly and safely. This step is essential for thorough cleaning and preventing any unwanted damage to your device.

See also  How to make plant in little alchemy

By following these preparation steps, you can clean your burnt coil safely and effectively, ensuring optimal performance and longevity of your vaping device.

Step-by-Step Cleaning Instructions

To clean a burnt coil, follow these step-by-step instructions:

  1. Gather the necessary materials

    Before you begin cleaning your burnt coil, make sure you have the following materials:

    • Dish soap
    • Warm water
    • A small bowl
    • A soft brush or toothbrush
    • A clean cloth or paper towel
    • New replacement coils (optional)
  2. Disassemble the tank and remove the burnt coil

    Detach the tank from your device and carefully disassemble all parts. Locate the burnt coil, which is typically found at the bottom of the tank. Carefully remove it.

  3. Soak the coil in warm soapy water

    Fill the small bowl with warm water and add a few drops of dish soap. Submerge the burnt coil in the soapy water and let it soak for at least 30 minutes. This will help loosen any built-up residue and gunk.

  4. Scrub the coil with a brush

    After soaking, take the soft brush or toothbrush and gently scrub the burnt coil. Pay close attention to the areas with the most residue. Avoid using excessive force as this can damage the coil.

  5. Rinse and dry the coil

    Once you have thoroughly scrubbed the coil, rinse it under running water to remove any leftover soap or debris. Use a clean cloth or paper towel to pat dry the clean coil. Make sure to remove as much moisture as possible.

  6. Reassemble the tank and test the coil

    After the coil is completely dry, reassemble the tank by putting all the parts back together. Once reassembled, securely attach the tank to your device. Fill the tank with e-liquid and give it a few minutes for the wick to soak up the e-liquid. Test the coil by taking a few puffs to ensure it is working properly.

  7. Consider replacing the coil if necessary

    If the burnt taste persists or the coil does not work properly after cleaning, it may be time to replace it with a new coil. Follow the manufacturer’s instructions for replacing coils specific to your device.

By following these step-by-step cleaning instructions, you can effectively clean a burnt coil and enhance the overall vaping experience.

Reassembling and Testing

Once you have thoroughly cleaned the burnt coil and all its components, it is time to reassemble them. Make sure to follow the manufacturer’s instructions and reattach all parts carefully.

Before testing the coil, it is essential to prime it first. Allow the coil to soak in e-liquid for at least 10 minutes to ensure proper saturation and prevent dry hits.

Once the coil is primed, reattach the atomizer to your vaping device. Check if the connections are secure, and there are no loose wires.

See also  How to take the back off a watch

Fill your tank with e-liquid, making sure to avoid overfilling. Let the tank sit for a couple of minutes to allow the e-liquid to settle.

Now it’s time to test your coil. Start with a low wattage setting and gradually increase the power as needed. Take a few short puffs to make sure everything is working correctly.

If you notice any strange tastes or burnt flavors, stop vaping immediately and check your coil for any signs of burning. If necessary, repeat the cleaning process or replace the coil altogether.

Remember to clean your coil regularly to prevent build-up and extend its lifespan. By maintaining your coil properly, you can enjoy a clean and flavorful vaping experience for longer.

Tips for Preventing Coil Burnout

Preventing coil burnout is important in order to prolong the lifespan of your vaping device and ensure an optimal vaping experience. Here are some tips to help you avoid coil burnout:

1. Use the right wattage: Using wattages that are too high for your coil can easily burn it out. Always follow the recommended wattage range provided by the coil manufacturer. If you want to adjust the wattage, do it gradually and monitor how it affects the taste and performance of your vape.

2. Prime your coils: Before using a new coil, it’s crucial to prime it properly. Apply a few drops of e-liquid to the cotton wick and let it soak for a few minutes. This step ensures that the coil is properly saturated with e-liquid, preventing dry hits and burnt taste.

3. Avoid chain vaping: Chain vaping, which means taking consecutive puffs without giving the coil sufficient time to cool down, can lead to overheating and eventually, burnt coils. Take breaks between puffs to let your coil cool down and extend its lifespan.

£0.99
as of April 7, 2024 3:31 pm
Amazon.co.uk

4. Keep an eye on e-liquid levels: Running your tank with very low e-liquid levels can cause the coil to burn quickly. Make sure to refill your tank before it’s completely empty to avoid dry hits and burnt coils.

5. Avoid sweet and thick e-liquids: E-liquids with high amounts of sweeteners and a thick consistency are known to gunk up coils and shorten their lifespan. Opt for e-liquids that are lighter in thickness and contain less sweeteners to minimize the risk of coil burnout.

6. Clean your device regularly: Regularly cleaning your vaping device, including the tank and the coil, can help prevent coil burnout. Use warm water and mild soap to clean the tank and let it dry thoroughly before reassembling. This removes any residue that may accumulate and negatively impact the coil’s performance.

By following these tips, you can maintain the longevity of your coils and enjoy a consistent and flavorful vaping experience.

Harrison Clayton

Harrison Clayton

Meet Harrison Clayton, a distinguished author and home remodeling enthusiast whose expertise in the realm of renovation is second to none. With a passion for transforming houses into inviting homes, Harrison's writing at https://thehuts-eastbourne.co.uk/ brings a breath of fresh inspiration to the world of home improvement. Whether you're looking to revamp a small corner of your abode or embark on a complete home transformation, Harrison's articles provide the essential expertise and creative flair to turn your visions into reality. So, dive into the captivating world of home remodeling with Harrison Clayton and unlock the full potential of your living space with every word he writes.

The Huts Eastbourne
Logo