How To Fix Garden Shears That Wont Cut
Garden shears are essential tools for any gardener, but they can become dull or rusty over time, making it difficult to make clean and precise cuts. If your garden shears no longer cut through branches and stems effortlessly, don’t worry – there are a few simple steps you can take to fix them and get them back in working order.
The first thing you should do is inspect the blades of your shears. Look for any signs of rust, damage, or dullness. If the blades are rusty, you can use a wire brush or sandpaper to gently remove the rust. If the blades are damaged, you may need to file or sharpen them. If the blades are dull, you can use a sharpening stone or a sharpening tool specifically designed for garden shears.
Once you have inspected and cleaned the blades, it’s time to lubricate them. Apply a few drops of oil or silicone spray to the pivot point and the blades of your shears. This will help reduce friction and make cutting easier. Make sure to wipe off any excess oil before using the shears.
Another common issue that can prevent garden shears from cutting properly is a loose pivot screw. Check if the pivot screw is tight – if it’s loose, use a screwdriver to tighten it. Be careful not to overtighten the screw, as this can cause the blades to bind. Adjust the tension of your shears by turning the pivot screw until the blades move smoothly without any wobble.
Remember to clean, lubricate, and tighten your shears regularly to prevent them from becoming dull or rusty. By following these simple steps, you can easily fix garden shears that won’t cut and keep them in good working condition for years to come.
Common Issues with Garden Shears
While garden shears are a versatile tool for keeping your plants and bushes well-maintained, they can encounter a few common issues over time. Here are some of the most frequent problems you may experience with your garden shears:
Dull blades: One common issue with garden shears is that the blades can become dull over time due to frequent use. Dull blades can make it difficult to cut through branches and stems, leading to frustration and ineffective pruning. To fix this issue, you can sharpen the blades using a sharpening stone or take them to a professional for sharpening.
Rust: Another issue that garden shears often face is rust formation, especially if they are not properly stored or exposed to moisture. Rust can weaken the blades and make them less effective. To address this issue, you can use sandpaper or a wire brush to remove the rust from the blades. Apply a rust-inhibiting oil to prevent future rusting.
Loose or misaligned blades: Over time, the blades of garden shears can become loose or misaligned, making it challenging to cut plants cleanly. To fix this problem, you can tighten any screws or pivot points that hold the blades together. If the blades are misaligned, you may need to disassemble the shears and realign them before reassembling.
Sticky or dirty blades: Garden shears can accumulate sap, resin, or dirt while in use, leading to sticky or dirty blades. This can affect their cutting ability and potentially transfer diseases between plants. To resolve this issue, use warm soapy water to clean the blades thoroughly. Dry the shears completely before applying a lubricating oil to keep them working smoothly.
Worn-out or broken parts: Garden shears consist of several movable parts that may wear out or break over time. This can include springs, handles, or locking mechanisms. If you encounter any broken or worn-out parts, you may need to replace them to ensure optimal functionality.
By understanding these common issues with garden shears, you can easily troubleshoot and fix problems that may arise during your gardening activities. Regular maintenance and proper storage can help prolong the life of your garden shears and ensure they are ready to use whenever you need them.
Dull Blades
One of the most common reasons why garden shears won’t cut is due to dull blades. Over time, the blades of the shears can become worn down and lose their sharpness, making it difficult to cut through branches and stems. Luckily, there are a few simple steps you can take to fix this problem and restore the cutting power of your garden shears.
1. Sharpen the Blades
One option is to sharpen the blades yourself using a sharpening stone or a file. Start by securing the shears in a vise or holding them firmly in one hand. Then, use the sharpening stone or file to carefully run along the edge of each blade, following the original bevel. Make sure to maintain a consistent angle and apply even pressure. Repeat this process several times until you have achieved a sharp edge.
2. Use a Blade Sharpener
If you don’t feel confident sharpening the blades by hand, you can also use a blade sharpener designed specifically for garden shears. This tool will help you achieve a precise and consistent edge on the blades. Simply follow the instructions provided with the sharpener, which typically involve clamping the shears in place and running the sharpener along the edge of the blades.
It’s worth noting that some garden shears have replaceable blades, which can be easily removed and replaced with new ones. If the blades are excessively worn or damaged, it may be more cost-effective to purchase new blades rather than attempting to sharpen them.
Remember, it’s important to keep your garden shears well-maintained by regularly cleaning and oiling them. This will help prevent rust and keep the blades in good condition, ensuring that they stay sharp and ready for use.
Misaligned Blades
One common reason why garden shears may not cut properly is due to misaligned blades. Over time, blades can get knocked out of alignment, resulting in a poor cutting performance.
To fix this issue, you will need a screwdriver and possibly a small hammer. Start by carefully inspecting the shears to identify any visible alignment problems. Look for any gaps or irregularities in the way the blades meet.
If you notice any misalignment, you will need to adjust the blades. Begin by loosening the screws that hold the blades together. Use the screwdriver to turn the screws counterclockwise, but be careful not to completely remove them.
Once the screws are loose, manually realign the blades so that they meet perfectly. If the blades are bent, you may need to tap them gently with a small hammer to straighten them out. Take your time and ensure that the blades are in the proper position before tightening the screws.
After aligning the blades, tighten the screws back in place by turning them clockwise with the screwdriver. Be careful not to overtighten the screws, as this can put unnecessary strain on the shears.
Once the screws are secure, test the shears by cutting a small branch or stem. If the shears still do not cut smoothly, double-check the alignment and repeat the adjustment process if necessary.
Regular maintenance and cleaning can also help prevent misaligned blades. After each use, wipe the blades clean and apply a small amount of lubricating oil to keep them moving smoothly.
Conclusion
Fixing garden shears with misaligned blades may involve some basic adjustments and inspections. By taking the time to realign the blades and ensuring they are properly tightened, you can restore your shears’ cutting performance and extend their lifespan.
Rusty Blades
If your garden shears have rusty blades, it can greatly affect their performance and make them almost impossible to cut with. Rust can build up on the blades over time, especially if they are not properly cleaned and stored after use. Fortunately, there are several steps you can take to remove rust and restore the sharpness of your garden shears.
Cleaning the Blades:
Start by using a wire brush or a piece of steel wool to scrub off any loose rust from the blades. This will help expose the underlying metal and make it easier to remove the rust. Be sure to scrub both sides of the blades and pay special attention to any areas where rust is particularly heavy.
Next, soak a cloth or a piece of fine-grit sandpaper in white vinegar or lemon juice. These acidic substances will help dissolve the rust. Rub the vinegar or lemon juice-soaked cloth or sandpaper onto the blades, applying gentle pressure to remove the rust. You may need to repeat this step several times, depending on the severity of the rust.
Pro Tip: If the rust is stubborn and won’t come off, you can try soaking the blades in vinegar or lemon juice for an hour or two before scrubbing.
Sharpening the Blades:
Once the rust is removed, it’s important to sharpen the blades to restore their cutting ability. Use a sharpening stone or a metal file to carefully sharpen the cutting edges of the blades. Follow the natural angle of the blades and work in long, smooth strokes. Be sure to sharpen both sides of the blades evenly to maintain their balance.
Pro Tip: To test if the blades are sharp enough, try cutting through a piece of paper. If the shears can cut through the paper effortlessly, they are sharp enough.
Preventing Future Rust:
To prevent your garden shears from rusting again in the future, it’s important to take proper care of them. After each use, wipe the blades clean with a dry cloth to remove any moisture or debris. If the shears are particularly dirty or covered in sap, you can use warm soapy water to clean them. Once clean, dry the blades thoroughly with a clean cloth and apply a thin layer of oil to protect them from moisture.
Pro Tip: Store your garden shears in a dry place, such as a shed or a garage, to prevent them from rusting due to exposure to the elements.
By following these steps, you can effectively remove rust from your garden shears and ensure that they are sharp and ready to use. Remember to wear protective gloves while working with sharp tools and always exercise caution to avoid accidents.
Steps to Fix Your Garden Shears
If your garden shears won’t cut through branches or leaves as easily as they used to, it’s time to give them some maintenance. Follow these steps to fix your garden shears:
1. Clean the blades
Start by removing any dirt or debris from the blades. Use a soft brush or cloth to wipe away the buildup. You can also soak the blades in warm soapy water for a few minutes to loosen any stubborn residue. Rinse and dry them thoroughly before moving on to the next step.
2. Sharpen the blades
Blunt blades can be the reason your garden shears are not cutting properly. Use a sharpening stone or a metal file to sharpen the edges. Hold the stone or file at a 20-degree angle and run it along the edge of each blade, moving from the base to the tip. Repeat this process several times until the blades become sharp.
Note: Make sure to wear protective gloves while sharpening the blades to avoid any accidents.
3. Lubricate the pivot and blades
A properly lubricated pivot and blades can greatly improve the functionality of your garden shears. Apply a drop or two of sewing machine oil, mineral oil, or any other household oil onto the pivot point and any moving parts. Open and close the shears a few times to distribute the lubricant evenly. Wipe off any excess oil to prevent dirt from sticking.
4. Adjust the tension
If your garden shears still won’t cut properly after cleaning and sharpening, the tension might be the issue. Most garden shears have a screw or nut near the pivot point that allows you to adjust the tension. Use a screwdriver or pliers to tighten or loosen the screw or nut until you find the right balance for smooth cutting action.
Note: Refer to the manufacturer’s instructions or search online for specific tips on adjusting the tension for your type of garden shears.
By following these steps, you can fix your garden shears and ensure they are sharp and ready for your next gardening task.
Clean and Lubricate the Blades
One common issue that can prevent garden shears from cutting effectively is a buildup of dirt and debris on the blades. Over time, this accumulation can cause the blades to become dull and hinder their cutting ability. To fix this problem, you will need to clean and lubricate the blades.
Here is a step-by-step guide on how to clean and lubricate your garden shears:
- Start by placing your garden shears on a flat surface and use a wire brush or an old toothbrush to remove any dirt or debris from the blades. Be sure to clean both the cutting edge and the outer surfaces of the blades.
- Next, fill a bucket or sink with warm water and add a small amount of dish soap. Submerge the blades of the shears in the soapy water and let them soak for a few minutes to help loosen any stubborn grime.
- After soaking, use a sponge or cloth to scrub the blades and remove any remaining dirt. Pay close attention to the area where the blades meet, as this is where most of the debris tends to collect.
- Rinse the shears thoroughly with clean water to remove any soap residue.
- Dry the blades completely with a clean towel to prevent rusting. Make sure to dry all the nooks and crannies, as any moisture left behind can lead to corrosion.
- Once the blades are clean and dry, apply a thin layer of lubricating oil to the cutting edge and any movable parts. This will help reduce friction and keep the shears working smoothly.
It is important to note that regular maintenance, including cleaning and lubricating the blades, is essential for prolonging the lifespan of your garden shears and ensuring optimal cutting performance. By following these simple steps, you can easily fix garden shears that won’t cut and get them back in working order.
Questions and answers
Why won’t my garden shears cut?
There could be several reasons why your garden shears won’t cut. First, they may be dull and in need of sharpening. You can use a sharpening stone or take them to a professional for sharpening. Second, the blades may be misaligned or damaged. In this case, you will need to realign or replace the blades. Finally, the shears may be dirty or rusted. Cleaning them thoroughly and applying a rust remover can help restore their cutting ability.
How can I sharpen my garden shears?
Sharpening your garden shears is a simple process. First, you will need to secure the shears in a vise or hold them firmly with a hand clamp. Then, use a sharpening stone or a diamond file to file the edges of the blades. Make sure to maintain the original bevel angle of the blades. After sharpening, clean off any metal residue and oil the shears to prevent rust. You can also use a honing compound for a finer edge.
What should I do if the blades of my garden shears are misaligned?
If the blades of your garden shears are misaligned, you can fix them by using a crescent wrench or pliers to loosen the pivot screw. Once the screw is loose, manually align the blades by sliding them into the correct position. Make sure that the cutting edges meet evenly. Then, tighten the pivot screw back in place, ensuring that it’s snug but not overly tight. Test the shears to ensure they cut smoothly before using them again.
How to cut wrist
Harrison Clayton
Meet Harrison Clayton, a distinguished author and home remodeling enthusiast whose expertise in the realm of renovation is second to none. With a passion for transforming houses into inviting homes, Harrison's writing at https://thehuts-eastbourne.co.uk/ brings a breath of fresh inspiration to the world of home improvement. Whether you're looking to revamp a small corner of your abode or embark on a complete home transformation, Harrison's articles provide the essential expertise and creative flair to turn your visions into reality. So, dive into the captivating world of home remodeling with Harrison Clayton and unlock the full potential of your living space with every word he writes.
