How to roll a cross joint
Rolling a cross joint is a popular and impressive way to showcase your rolling skills. Made famous by the movie Pineapple Express, a cross joint is a joint that has two additional smaller joints crafted and placed in the center to form a cross shape. It’s a novelty way to enhance your smoking session and impress your friends.
To roll a cross joint, you’ll need a few key supplies: rolling papers, a grinder, filters, cannabis, and preferably a small piece of rolled-up cardboard or rolled-up business card to reinforce the center. Here’s a step-by-step guide to rolling a cross joint that will leave you with a perfectly rolled and sturdy masterpiece.
Gather Your Supplies
Before you begin rolling, make sure you have everything you need to create your cross joint. Start by selecting your rolling papers – ideally, you’ll want two regular-sized rolling papers and one larger rolling paper. You’ll also need a grinder to evenly break down your cannabis and filters to place at the ends of each joint for a smoother smoke. Lastly, gather some small pieces of cardboard to strengthen the cross joint or make a small filter out of business card paper.
Roll the Cross Joint
Begin by grinding your cannabis until it has a finer consistency. Next, take one of the regular-sized rolling papers and roll a joint as you normally would, leaving a little extra space at the end for the second joint to fit inside. Once you’ve rolled the first joint, set it aside temporarily.
Take the second rolling paper and fold it in half. Using your fingers or the folded paper as a guide, roll the second smaller joint tightly, making sure it’s slightly thinner than the first joint. Seal the joint by licking the adhesive and closing it up.
Now, take the first joint that you rolled and carefully poke a small hole in the center using a pin or a needle. The hole should be large enough to fit the second joint inside snugly. Slide the second joint inside the hole, cross-wise, so that the two joints form a cross shape. Make sure the second joint is securely in place.
Using your extra piece of cardboard or rolled-up business card, place it horizontally through the second joint, about halfway down, to add stability and reinforce the cross joint.
And voilà, you’ve successfully rolled a cross joint! Take a moment to admire your creation, light it up, and enjoy a unique smoking experience.
Important steps for rolling a cross joint
Rolling a cross joint may seem like a daunting task, but with these simple steps, you can master this impressive smoking technique:
Step 1: Gather your materials
Before you begin, make sure you have everything you need. You will need two regular rolling papers, one longer rolling paper, a crutch or a filter tip, and your preferred smoking herb.
Step 2: Prepare the longer rolling paper
Take the extra-long rolling paper and fold it in half lengthwise. Then, carefully tear along the folded line to create two separate halves. Set one half aside for now.
Step 3: Roll two individual joints
Roll two regular-sized joints using the rolling papers. Make sure to leave room at the end of each joint for inserting the cross joint.
Step 4: Assemble the cross joint
Take the remaining half of the longer rolling paper and place it horizontally on a flat surface. Insert one end of the two regular-sized joints into the longer paper, aligning them in a cross shape. Seal the paper around the joints tightly, leaving no gaps.
Step 5: Add the crutch or filter
Insert a crutch or filter tip into one end of the cross joint. This will help improve airflow and stability when smoking. Make sure to pack it firmly, but not too tightly.
Step 6: Finish rolling the cross joint
With the crutch or filter end in place, continue rolling the cross joint tightly. Use your fingers to shape and secure the paper around the joints, making sure it is even and doesn’t have any loose ends.
Step 7: Light it up and enjoy!
Once you have successfully rolled the cross joint, it is time to light it up and enjoy. Take your preferred smoking device or simply ignite it using a lighter, and take slow, steady inhales to savor the unique experience of smoking a cross joint.
Remember to consume responsibly and know your limits. And most importantly, have fun and enjoy this impressive rolling achievement!
Gather the necessary materials
In order to roll a cross joint, you will need to gather the following materials:
1. Marijuana
You will need enough marijuana to fill both the main joint and the cross-shaped joint. Make sure to use high-quality marijuana for the best smoking experience.
2. Rolling papers
You will need two rolling papers, one for the main joint and one for the cross-shaped joint. Choose rolling papers that are the appropriate size for the amount of marijuana you are using.
3. Filter or crutch
Using a filter or crutch is optional but recommended as it can prevent small pieces of marijuana from being inhaled and improve airflow. You can purchase pre-made filters or make your own using cardboard or a small piece of rolled-up paper.
4. Scissors
Scissors will be needed to cut the rolling papers to size and shape them into the cross-shaped joint. Make sure to use clean and sharp scissors for the best results.
5. Additional decorations (optional)
If desired, you can gather any additional decorations that you would like to add to your cross joint, such as colored rolling papers, flavored filters, or twists of ribbon. These are not necessary for rolling the joint but can add a fun and personalized touch.
Once you have gathered all the necessary materials, you will be ready to begin rolling your cross joint.
Step-by-step instructions
1. Gather all the necessary supplies: rolling papers, weed, a poker tool, and scissors.
2. Start by rolling two separate joints: a larger one for the base and a thinner one for the cross.
3. Take the larger joint and poke a hole near one end, creating a tunnel through the middle.
4. Using the poker tool, carefully widen the hole to ensure smooth airflow.
5. Take the smaller joint and remove the filter paper if it has one.
6. Insert the smaller joint into the hole of the larger joint, lining it up perpendicular to the base joint.
7. Tear off a strip of rolling paper and fold it into a slim V-shape to serve as a support for the cross joint.
8. Place the folded V-shaped paper about an inch away from the smaller joint, wrapping it around both joints tightly.
9. Lightly wet the paper to ensure it sticks together securely.
10. Use the scissors to trim any excess paper.
11. Light up the cross joint and enjoy!
Meet Harrison Clayton, a distinguished author and home remodeling enthusiast whose expertise in the realm of renovation is second to none. With a passion for transforming houses into inviting homes, Harrison's writing at https://thehuts-eastbourne.co.uk/ brings a breath of fresh inspiration to the world of home improvement. Whether you're looking to revamp a small corner of your abode or embark on a complete home transformation, Harrison's articles provide the essential expertise and creative flair to turn your visions into reality. So, dive into the captivating world of home remodeling with Harrison Clayton and unlock the full potential of your living space with every word he writes.
