How to clean a waxed barbour jacket
Barbour jackets are known for their durability and classic style, making them a popular choice for outdoor enthusiasts and fashion-conscious individuals alike. These jackets are typically made with a waxed cotton material that provides excellent water resistance.
However, over time, dirt, stains, and grime can accumulate on the waxed surface, compromising its ability to repel water. Regular cleaning and maintenance are essential to keep your Barbour jacket looking its best and to ensure its longevity.
To clean a waxed Barbour jacket, you need to follow a specific process to protect the wax finish and maintain its water-repellent properties. In this article, we will guide you through the steps to effectively clean your waxed Barbour jacket without damaging the fabric.
Before starting, keep in mind that Barbour recommends minimizing the frequency of cleaning to preserve the jacket’s natural beauty. Sometimes, a spot clean with a damp cloth is enough to remove minor stains. However, if your jacket needs a more thorough cleaning, follow the steps below to restore it to its original glory.
Step-by-Step Guide to Clean a Waxed Barbour Jacket
Barbour jackets are known for their durability and classic style. To keep your waxed Barbour jacket looking its best, it’s important to clean and re-wax it regularly. Follow these steps to safely clean your waxed Barbour jacket:
- Start by brushing off any dirt or debris from the surface of the jacket. Use a soft-bristled brush or cloth to gently remove any loose dirt.
- Fill a sink or basin with lukewarm water. Add a small amount of mild, non-detergent soap and mix until the soap is dissolved.
- Submerge the jacket in the soapy water, and gently agitate it to loosen any stains or dirt. Avoid scrubbing or rubbing the fabric, as this could damage the wax coating.
- Rinse the jacket thoroughly to remove all soap residue. Hold the jacket under running water, or refill the sink with clean water and swish the jacket around to ensure all soap is removed.
- Gently squeeze out any excess water from the jacket, being careful not to wring or twist the fabric.
- Lay the jacket flat on a clean towel or drying rack, and allow it to air dry. Avoid direct heat or sunlight, as this can cause the wax to melt or fade.
- Once the jacket is completely dry, you can reapply wax to restore its water-resistant properties. Follow the manufacturer’s instructions for applying the wax product, using a clean cloth or sponge to evenly distribute the wax.
- Allow the wax to dry for the recommended amount of time, and then gently buff the jacket with a soft cloth to remove any excess wax.
- Your waxed Barbour jacket is now clean and re-waxed, ready for you to enjoy for years to come!
Remember to clean and re-wax your Barbour jacket regularly to maintain its appearance and performance. By following these steps, you can ensure that your jacket continues to look its best while keeping you protected from the elements.
Preparation and Materials
Before cleaning your waxed Barbour jacket, there are a few steps you should take in preparation. Here are the materials you will need:
- Soft bristle brush
- Mild soap or specialized Barbour wax jacket cleaner
- Warm water
- Lukewarm iron (if necessary)
- Lint-free cloth or sponge
-
Cleaning the jacket the right way.
The cleaning process for your waxed Barbour jacket involves scrubbing the surface with warm water and soap. Avoid using any harsh chemicals or solvents as they may damage the waxed finish.
First, brush off any loose dirt or debris from the jacket using a soft-bristled brush. This will help prevent any scratches or marks during the cleaning process.
Next, create a mixture of mild soap or Barbour wax jacket cleaner with warm water. Use a lint-free cloth or sponge to gently scrub the surface of the jacket. Pay special attention to any soiled areas or stains.
After thoroughly cleaning the jacket, rinse off any soap residues with clean water. Make sure to remove all the soap to avoid any residue build-up on the jacket.
Once the jacket is clean, leave it to air dry naturally. Avoid wringing or using a heat source to dry the jacket, as this can damage the waxed finish.
In some cases, the jacket may lose its water-repellent properties over time. If this is the case, you can rejuvenate the waxed finish by reapplying wax to the jacket with a warm iron. Simply place a lint-free cloth over the waxed area and use the iron on a low heat setting to melt the wax back into the fabric. Be careful not to place the iron directly on the waxed surface.
By following these simple steps, you can effectively clean and maintain your waxed Barbour jacket, keeping it looking great for years to come.
Cleaning the Jacket
Properly cleaning your waxed Barbour jacket is essential to maintaining its longevity and ensuring its weather resistance. By following these steps, you can effectively remove dirt and grime without damaging the waxed finish:
- Before cleaning your jacket, remove any detachable parts such as the hood or belt.
- Using a soft-bristled brush, gently brush off any loose dirt or debris from the surface of the jacket.
- Fill a sink or basin with lukewarm water. Avoid using hot water as it can strip away the wax coating.
- Add a mild, non-detergent soap specifically designed for waxed garments to the water. Be sure to read and follow the soap manufacturer’s instructions.
- Immerse the jacket in the soapy water and gently agitate it with your hands to distribute the soap and loosen any dirt.
- Allow the jacket to soak for approximately 20 minutes.
- Using a soft sponge or cloth, gently scrub the jacket to remove any remaining dirt or stains. Pay special attention to heavily soiled areas.
- Rinse the jacket thoroughly with lukewarm water to remove all soap residue.
- Gently squeeze out excess water from the jacket. Avoid wringing or twisting the fabric, as this can damage the waxed coating.
- Lay the jacket flat on a clean towel and reshape it to its original size and form. Ensure that the jacket is not exposed to direct sunlight or heat.
- Allow the jacket to air dry naturally. Do not tumble dry or use heat sources such as radiators or hairdryers, as this can cause the wax to melt or crack.
Once the jacket is completely dry, you can re-wax it using a specialty Barbour wax that is specifically designed for reproofing waxed garments. Refer to the manufacturer’s instructions or seek professional help if you are unsure about the re-waxing process.
Storing and Maintenance
Properly storing and maintaining your waxed Barbour jacket is essential to keep it in top condition and extend its lifespan. Follow these guidelines to ensure your jacket stays clean and well-preserved:
- Before storing your jacket, make sure it is completely dry. Hang it in a well-ventilated area away from direct sunlight and heat sources to allow any moisture to evaporate.
- Store your jacket in a cool and dry place. Avoid storing it in a damp or humid environment as this can damage the wax coating and cause mold or mildew to develop.
- Avoid folding your jacket for long periods of time, as this can cause permanent creases and affect the wax finish. Instead, hang it on a sturdy hanger to maintain its shape.
- Regularly clean your jacket using a soft cloth or sponge. Avoid using harsh detergents or cleaning products as they can strip away the wax coating. Instead, use a mild soap specifically designed for Barbour jackets or warm water to spot clean any stains.
- Occasionally re-proof your waxed jacket to maintain its water resistance. Use a wax dressing or re-proofing spray made specifically for Barbour jackets. Apply the wax evenly on the jacket’s surface and use a hairdryer or heat gun to melt the wax and help it penetrate the fabric.
- Inspect your jacket for any signs of damage or wear, such as loose threads or worn-out areas. Repair these issues promptly using a matching thread or Barbour repair kit to prevent them from worsening.
- If storing your jacket for an extended period, consider covering it with a breathable garment bag to protect it from dust and moths. Avoid using plastic bags as they can trap moisture.
- Avoid exposing your jacket to extreme temperatures or prolonged periods of sunlight, as it can fade the fabric and affect the wax coating.
- Lastly, wear your waxed Barbour jacket regularly to help maintain its suppleness and prevent the wax from drying out and cracking.
By following these tips, you can ensure that your waxed Barbour jacket remains in excellent condition and lasts for many years to come.
Harrison ClaytonMeet Harrison Clayton, a distinguished author and home remodeling enthusiast whose expertise in the realm of renovation is second to none. With a passion for transforming houses into inviting homes, Harrison's writing at https://thehuts-eastbourne.co.uk/ brings a breath of fresh inspiration to the world of home improvement. Whether you're looking to revamp a small corner of your abode or embark on a complete home transformation, Harrison's articles provide the essential expertise and creative flair to turn your visions into reality. So, dive into the captivating world of home remodeling with Harrison Clayton and unlock the full potential of your living space with every word he writes.
