How to deflate a vango air awning
If you own a Vango Air Awning, you know that it is a great accessory for any camping trip. These inflatable awnings are easy to set up and provide extra space and protection from the elements. However, when the time comes to pack up and go home, deflating the awning can be a bit tricky if you don’t know the proper steps. In this guide, we will walk you through the process of deflating your Vango Air Awning, making it a breeze to pack up and move on.
Step 1: Prepare the Awning
Before you start deflating the Vango Air Awning, it is important to make sure that everything is properly prepared. First, check that all the doors and windows are closed securely, ensuring that no air escapes prematurely. Next, remove any stakes or pegs securing the awning to the ground. This will make the deflation process easier and prevent any accidental snags or tears. Finally, double-check that all the zippers and valves are closed and properly sealed.
Step 2: Start the Deflation Process
Now that you have prepared the awning, it is time to start the deflation process. Begin by locating the valve that is specifically designed for deflation. This valve is usually easily identifiable and can be found on the sides or top of the awning. Once you have located the valve, open it up by twisting or pulling the valve cap. This will release the air more quickly and efficiently.
Step 3: Fold and Roll
As the air starts to escape, it is time to fold and roll the Vango Air Awning. Start by folding the awning into manageable sections, making sure that you have released as much air as possible. This will make it easier to control and pack. Once the awning is neatly folded, start rolling it tightly from the rear towards the front. This will compress the awning further and make it easier to transport.
Following these simple steps will help you deflate your Vango Air Awning with ease. Remember to maintain patience and be thorough in the deflation process to ensure that the awning is properly packed and protected for your next camping adventure.
Choosing the Right Method
When it comes to deflating a Vango air awning, there are a few different methods you can choose from. Each method has its own advantages and considerations, so it’s important to choose the one that’s right for you.
- Method 1: Manual deflation: This method involves manually releasing the air from the awning by opening the valves and pressing down on the fabric to force the air out. It is a simple and straightforward method that allows for complete control over the deflation process.
- Method 2: Partial deflation: This method involves partially deflating the awning by opening the valves and allowing only a portion of the air to escape. This can be useful if you want to quickly pack up and move the awning without fully deflating it.
- Method 3: Pump deflation: This method involves using a pump to remove the air from the awning. It can be a bit more time-consuming compared to manual deflation, but it allows for a more controlled and even deflation process.
When choosing the right method, consider factors such as the time you have available, your physical capabilities, and the specific requirements of your camping setup. Ultimately, the goal is to find a method that is convenient, efficient, and ensures that the awning is properly deflated and ready for storage.
Traditional versus Advanced Techniques
When it comes to deflating a Vango air awning, there are two main techniques you can use: traditional and advanced. Each technique has its own advantages and disadvantages, so it’s important to choose the one that works best for you.
Traditional Technique
The traditional technique involves manually releasing the air from each individual air tube. This method requires you to locate the valve on each tube and unscrew it to release the air. It is a straightforward process but can be time-consuming, especially if you have a large awning with multiple air tubes.
One advantage of the traditional technique is that it does not require any special tools or equipment. You only need to have access to each valve and be able to unscrew it to release the air. This technique is also relatively easy to learn and can be done by anyone with basic knowledge of the awning’s inflation system.
Advanced Technique
The advanced technique involves using an electric or manual pump with a deflation function to release the air from all the tubes simultaneously. This method can significantly reduce the time and effort required to deflate the awning, especially if you have a large awning or limited time.
One advantage of the advanced technique is its convenience and speed. With the use of a pump, you can deflate the awning with just a push of a button or a few manual pumping motions. This technique is also efficient and ensures that all the air is removed from the tubes, preventing any potential damage or mold growth.
Conclusion:
Both traditional and advanced techniques have their benefits and drawbacks when it comes to deflating a Vango air awning. The traditional technique is simple and accessible to everyone, while the advanced technique offers convenience and speed. Ultimately, the best technique for you will depend on your personal preference and the specific circumstances of your situation.
Preparing the Awning for Deflation
Before deflating your Vango air awning, there are a few steps you should take to ensure a smooth and hassle-free process.
- First, make sure all the windows and doors of the awning are closed properly. This will prevent any potential damage or debris from entering the awning during deflation.
- Next, disconnect any electrical hook-ups or appliances that are connected to the awning. This will help prevent any potential damage to the awning or electrical equipment.
- Once everything is disconnected, remove any loose or small objects from both the inside and outside of the awning to avoid them being blown around or damaged during deflation.
- Ensure that the awning is free from any tension or strain. This means removing any guy ropes or tension straps that may be holding the awning in place.
- Lastly, double-check that all valves and inflation points are closed tightly. This will prevent any air from re-entering the awning during the deflation process.
By following these steps, you will ensure a safe and efficient deflation process for your Vango air awning.
Removing Stakes and Guy-lines
Before deflating your Vango air awning, you should remove the stakes and guy-lines. This will make the process easier and prevent any damage to the awning.
To remove the stakes, start by loosening them. Use a stake puller tool or a flathead screwdriver to gently pry the stakes out of the ground. Be careful not to damage the stakes or the ground as you do this.
Once the stakes are removed, it’s time to remove the guy-lines. Start by loosening the tension on the lines. This can be done by pushing the line tensioners towards the awning, which will release the tension. Repeat this process for all the guy-lines attached to the awning.
Once the tension is released, unclip the guy-lines from the awning. Take care to keep the lines organized and untangled as you remove them. You can use a bag or a dedicated guy-line storage system to keep them neat and ready for the next use.
After removing all the guy-lines and stakes, double-check that the awning is free from any attachments. This will ensure a smooth deflation process and prevent any potential damage. It’s also a good opportunity to examine the awning for any signs of wear or damage that may need to be addressed before your next camping trip.
Deflating the Air Beams
Deflating the air beams of your Vango air awning is a simple process that can be done in just a few steps:
- Start by removing any accessories or attachments that you have added to the air beams, such as sun canopies or extension kits.
-
Once the attachment accessories are removed, locate the valves on the air beams. These will typically be on the corners of the beams, near the ground. They may be covered by a protective cap, which can be easily removed by twisting it off.
-
Open the valve by turning it to the “deflate” position. This will allow the air to escape from the beam.
-
Press down on the beam to help push the air out. Starting from the furthest end, work your way towards the valve, applying pressure to squeeze out as much air as possible.
-
Once the beam is fully deflated, close the valve by turning it to the “closed” position. Make sure it is securely closed to prevent any air from re-entering the beam.
-
Repeat this process for each air beam in your awning until all of them are deflated.
-
Once all the air beams are deflated, you can proceed to fold and pack away your Vango air awning according to the manufacturer’s instructions.
Following these steps will ensure that your Vango air awning is properly deflated and ready to be packed away for storage or transportation.
Releasing Air through the Valves
To deflate your Vango Air Awning, the first step is to release the air through the valves. The valves are located on the air tubes and they allow you to easily remove the air from the awning.
To begin, locate the valves on the air tubes. These are usually labeled and can be found at various points along the tubes. Once you have located the valves, gently twist and pull up on the valve cap to open it. This will allow the air to escape.
Start with one valve and open it fully. You will hear a hissing sound as the air escapes. It’s important to ensure that all the air is released from the awning before moving onto the next valve.
Once you have opened all the valves, gently push down on the fabric to help squeeze out any remaining air. This will expedite the deflation process and make it easier to pack up the awning.
Once all the air has been released, make sure to secure the valve caps back in place. This will prevent any air from seeping back into the awning.
With the air fully released and the valve caps secure, you can now move on to folding and packing the awning away. This is an important step to ensure that your Vango Air Awning can be easily transported and stored until its next use.
Folding and Rolling the Awning
Once you have deflated the Vango Air Awning, the next step is to fold and roll it for easy storage and transportation. This process can be done quickly and efficiently if you follow these steps:
- Start by loosening the quick pitch buckle straps and retracting the quick pitch guylines. This will allow you to fold the awning without any tension.
- Make sure the awning is completely dry before folding it, as moisture can cause mold or mildew over time.
- Begin folding the awning by bringing the sides towards the center, using the deflate avenues as a guide.
- Finish folding the awning by rolling it tightly from the front towards the back. Make sure the awning is folded evenly and there are no wrinkles or creases.
- Secure the folded awning with the buckle straps provided. This will ensure that it stays compact and doesn’t unfurl during transportation.
- Store the folded awning in a dry and clean storage bag, away from any sharp objects or chemicals that could damage it.
By following these steps, you’ll be able to efficiently fold and roll your Vango Air Awning. This will make it easier to store and transport, ensuring that you can enjoy your outdoor adventures without any hassle.
Harrison Clayton
Meet Harrison Clayton, a distinguished author and home remodeling enthusiast whose expertise in the realm of renovation is second to none. With a passion for transforming houses into inviting homes, Harrison's writing at https://thehuts-eastbourne.co.uk/ brings a breath of fresh inspiration to the world of home improvement. Whether you're looking to revamp a small corner of your abode or embark on a complete home transformation, Harrison's articles provide the essential expertise and creative flair to turn your visions into reality. So, dive into the captivating world of home remodeling with Harrison Clayton and unlock the full potential of your living space with every word he writes.
